Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Force-Deploying a Service

    When a service fails a configuration audit because configuration changes on a PE device do not match the configuration required for the service, you can force-deploy the service to push the configuration to the device.

    Force deployment pushes the same configuration to the device that was pushed during the deployment of the service, thus allowing the operator to recover from a state in which the configuration on the device was lost or changed out-of-band.

    The validation before generating the configuration for a force-deployed service order will be performed against the current configuration on the device and the configuration is not pushed if the validation fails. If the forced deployment is unable to push the configuration again, then you might need to manually configure the device.

    This procedure forces deployment of a service on the network.

    You cannot force-deploy an invalid service order.

    To schedule a service for forced deployment:

    1. From the View selector, select Service View. The workspaces that are applicable to routing and tunnel services are displayed.
    2. From the Junos Space user interface, click the Deploy icon in the Connectivity Services Director banner. The functionalities that you can configure in this mode are displayed in the task pane.
    3. From the Service View pane, which is the left pane in the window, click the plus sign (+) next to Network Services to expand the tree and display the different service types that you can configure.
    4. Click the plus sign (+) beside Connectivity to view services based on protocols.
      • Expand the L3VPN Services tree to select a Layer 3 VPN Ethernet service.

      • Expand the P2P Services tree to select a point-to-point service.

      • Expand the VPLS Services tree to select a VPLS service.

    5. From the task pane, select Service Provisioning > Deploy Services. The top part of the right pane displays the Manage Network Services page, with the table of services, and the bottom part of the right pane displays the Manage Service Orders page, with the table of service orders.
    6. From the Manage Network Services page, select the check box next to the service you want to forcibly deploy.

      Tip: In Build mode of Service View, from the View pane, if you select the Network Services node and do not expand the Network Services > Connectivity tree, the top pane displays a pie chart that enables you to view and examine the different services configured for devices, and the types of service protocols configured. The Services by Type graph displays the count of services for each type of service definition. Mouse over each segment of the pie to view the number corresponding to the percentage of service orders for each of the charts. This chart provides a visual overview of customers and service orders on your network, and enables you to quickly access related and commonly needed information. For example, you can check for failed service orders and then access a list of failed requests so you can begin to take restoration measure.

      The top pane displays information about the services that have been previously created, such as the name of the service, the functional audit status, the performance management status, and the status of the service. You can modify the properties of the service, conduct a functional or configuration audit, force-deploy or deactivate the service, and view alarms associated with a particular service order for debugging and corrective action. Services can be in one of the following service states:

      • Completed—The service order has been successfully deployed.

      • Scheduled for deployment—The service provisioner has scheduled the service order for deployment.

      • Deployment Failed—An attempted service deployment was not successfully completed or failed an audit.

      • In Progress—The Connectivity Services Director application is in the process of deploying the service.

      • Requested—The service provisioner has created the service order, but has not yet attempted to deploy it or schedule it for deployment.

      • Invalid—The service order is not valid.

    7. Open the Actions menu and click Force Deploy Service.

      The Schedule Force Deployment window appears.




    8. To deploy the service immediately, select Force deploy now, and click OK .

      To deploy the service at a later time, select Force deploy later, select a date and time for deployment, then click OK.

      The time field specifies the time kept by the server, but in the time zone of the client.

      After scheduling the service order for deployment, the provisioning software begins validating the service order.

    9. Use the Jobs workspace to monitor the outcome of the forced deployment.

    Modified: 2015-09-21