Configuring Static Hierarchical Scheduling in a Dynamic Profile
You configure static scheduling and queuing in a dynamic profile for subscriber access. To configure CoS in a dynamic profile for subscriber access using static scheduling and queuing parameters:
- Configure the static CoS parameters in the
[edit class-of-service]
hierarchy.- Enable the hierarchical scheduler for the interface.
- Configure the scheduler map and schedulers.
When you configure static scheduling and queuing in a dynamic profile, you reference the scheduler map in the dynamic profile.
- Configure the drop profiles.
- Configure the forwarding classes.
- Configure the rewrite-rules and classifier definitions.
See The Junos OS CoS Components Used to Manage Congestion and Control Service Levels for information about configuring the remaining CoS parameters.
- Configure a static or dynamic subscriber interface that can be referenced in the dynamic profile.
- Configure CoS parameters in a dynamic profile.
- Configure the dynamic profile.
- Configure traffic shaping and scheduling parameters in
the dynamic profile using a traffic-control profile. Reference the
scheduler map you configured in the static
[edit class-of-service]
hierarchy. - Apply CoS parameters to a subscriber interface by referencing an interface in the dynamic profile.
- To configure default values for subscribers on login, and enable subscribers to replace other CoS parameters when replacing services, configure variables in the dynamic profile.