no-temperature-monitoring
Syntax
no-temperature-monitoring;
Hierarchy Level
[edit chassis fpc fpc_slot pic pic_slot port port_no], [edit chassis lcc name fpc name pic name port], [edit chassis member name fpc name pic name port]
Description
Disable EM policy. Disable temperature monitoring to explicitly disable optics temperature sensors for EM policy monitoring and management, on specific WAN ports.
Note: When you enable
no-temperature-monitoring and configure set system syslog file messages any any command to get all relevant outputs, the following message is displayed in show log messages command output. PICD_OPTICS_EMPOLICY_NOTIFICATION: et-1/0/29: Optics Temperature monitoring is disabled. Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.