Auf dieser Seite
Beispiel: Konfigurieren von erweiterten Communitys in einer Routingrichtlinie
Eine erweiterte Community ähnelt in vielerlei Hinsicht einer regulären Community. Einige Netzwerkimplementierungen, wie z. B. virtuelle private Netzwerke (VPNs), verwenden erweiterte Communitys, da der reguläre Community-Wert von 4 Oktetten nicht genügend Erweiterung und Flexibilität bietet. Eine erweiterte Community ist ein Wert mit acht Oktetten, der in zwei Hauptabschnitte unterteilt ist.
Anforderungen
Vor der Konfiguration dieses Beispiels ist keine spezielle Konfiguration erforderlich, die über die Geräteinitialisierung hinausgeht.
Überblick
In diesem Beispiel sind Gerät R1 und Gerät R2 OSPF-Nachbarn im autonomen System (AS) 64510. Gerät R3 verfügt über eine externe BGP-Verbindung (EBGP) zu Gerät R1. Gerät R2 verfügt über Kundennetzwerke im Adressraum 172.16/16, die mit Adressen auf seiner Loopback-Schnittstelle (lo0) simuliert werden. Gerät R1 hat statische Routen zu mehreren 172.16./24 Netzwerke und legt auf diese Routen regelmäßige Gemeinschaftswerte.x Gerät R1 verwendet dann eine Exportrichtlinie, um die Routen zu Gerät R3 anzukündigen. Gerät R3 empfängt diese Routen und verwendet eine Importrichtlinie, um den Routen erweiterte Community-Werte hinzuzufügen.
Topologie
Abbildung 1 zeigt das Beispielnetzwerk an.
CLI-Schnellkonfiguration Zeigt die Konfiguration für alle Geräte in Abbildung 1an.
In diesem Abschnitt werden die Schritte auf Gerät R3 beschrieben.#configuration587__policy-extended-community-st
Konfiguration
CLI-Schnellkonfiguration
Um dieses Beispiel schnell zu konfigurieren, kopieren Sie die folgenden Befehle, fügen Sie sie in eine Textdatei ein, entfernen Sie alle Zeilenumbrüche, ändern Sie alle Details, die für Ihre Netzwerkkonfiguration erforderlich sind, und kopieren Sie dann die Befehle und fügen Sie sie in die CLI auf Hierarchieebene ein.[edit]
Gerät R1
set interfaces fe-1/2/0 unit 0 family inet address 10.0.0.1/30 set interfaces fe-1/2/3 unit 0 family inet address 10.0.0.14/30 set interfaces lo0 unit 0 family inet address 192.168.0.1/32 primary set protocols bgp group ext type external set protocols bgp group ext export send-static set protocols bgp group ext peer-as 64511 set protocols bgp group ext neighbor 10.0.0.13 set protocols ospf area 0.0.0.0 interface fe-1/2/0.0 set protocols ospf area 0.0.0.0 interface lo0.0 passive set policy-options policy-statement send-static term 1 from protocol static set policy-options policy-statement send-static term 1 then accept set routing-options static route 172.16.1.0/24 next-hop 10.0.0.2 set routing-options static route 172.16.1.0/24 community 64510:1 set routing-options static route 172.16.2.0/24 next-hop 10.0.0.2 set routing-options static route 172.16.2.0/24 community 64510:2 set routing-options static route 172.16.3.0/24 next-hop 10.0.0.2 set routing-options static route 172.16.3.0/24 community 64510:3 set routing-options static route 172.16.4.0/24 next-hop 10.0.0.2 set routing-options static route 172.16.4.0/24 community 64510:4 set routing-options router-id 192.168.0.1 set routing-options autonomous-system 64510
Gerät R2
set interfaces fe-1/2/0 unit 0 family inet address 10.0.0.2/30 set interfaces lo0 unit 0 family inet address 192.168.0.2/32 set interfaces lo0 unit 0 family inet address 172.16.1.1/32 set interfaces lo0 unit 0 family inet address 172.16.2.2/32 set interfaces lo0 unit 0 family inet address 172.16.3.3/32 set interfaces lo0 unit 0 family inet address 172.16.4.4/32 set protocols ospf area 0.0.0.0 interface fe-1/2/0.0 set protocols ospf area 0.0.0.0 interface lo0.0 passive set routing-options router-id 192.168.0.2 set routing-options autonomous-system 64510
Gerät R3
set interfaces fe-1/2/3 unit 0 family inet address 10.0.0.13/30 set interfaces lo0 unit 0 family inet address 192.168.0.3/32 set protocols bgp group to-R1 type external set protocols bgp group to-R1 import set-ext-comms set protocols bgp group to-R1 peer-as 64510 set protocols bgp group to-R1 neighbor 10.0.0.14 set policy-options policy-statement set-ext-comms term route-1 from route-filter 172.16.1.0/24 exact set policy-options policy-statement set-ext-comms term route-1 then community add target-as set policy-options policy-statement set-ext-comms term route-1 then accept set policy-options policy-statement set-ext-comms term route-2 from route-filter 172.16.2.0/24 exact set policy-options policy-statement set-ext-comms term route-2 then community add target-ip set policy-options policy-statement set-ext-comms term route-2 then accept set policy-options policy-statement set-ext-comms term route-3 from route-filter 172.16.3.0/24 exact set policy-options policy-statement set-ext-comms term route-3 then community add origin-as set policy-options policy-statement set-ext-comms term route-3 then accept set policy-options policy-statement set-ext-comms term route-4 from route-filter 172.16.4.0/24 exact set policy-options policy-statement set-ext-comms term route-4 then community add origin-ip set policy-options policy-statement set-ext-comms term route-4 then accept set policy-options community origin-as members origin:64511:3 set policy-options community origin-ip members origin:172.16.7.7:4 set policy-options community target-as members target:64511:1 set policy-options community target-ip members target:172.16.7.7:2 set routing-options router-id 192.168.0.3 set routing-options autonomous-system 64511
Verfahren
Schritt-für-Schritt-Anleitung
Im folgenden Beispiel müssen Sie durch verschiedene Ebenen in der Konfigurationshierarchie navigieren. Informationen zum Navigieren in der CLI finden Sie im Junos OS CLI-Benutzerhandbuch.Verwenden des CLI-Editors im Konfigurationsmodushttps://www.juniper.net/documentation/en_US/junos/information-products/pathway-pages/junos-cli/junos-cli.html
So konfigurieren Sie Gerät R3:
Konfigurieren Sie die Schnittstellen.
[edit interfaces] user@R3# set fe-1/2/3 unit 0 family inet address 10.0.0.13/30 user@R3# set lo0 unit 0 family inet address 192.168.0.3/32
Konfigurieren Sie die EBGP-Verbindung mit Gerät R1.
[edit protocols bgp group to-R1] user@R3# set type external user@R3# set import set-ext-comms user@R3# set peer-as 64510 user@R3# set neighbor 10.0.0.14
-
Konfigurieren Sie die Richtlinie, die den von Gerät R1 empfangenen Routen erweiterte Community-Werte hinzufügt.
Eine erweiterte Community verwendet eine Notation von .
type:administrator:assigned-number
Bei den spezifischen Community-Werten kann es sich um alles handeln, was Ihre administrativen Ziele innerhalb bestimmter Parameter erreicht, wie in erläutert.community (Policy Options)
[edit policy-options policy-statement set-ext-comms] user@R3# set term route-1 from route-filter 172.16.1.0/24 exact user@R3# set term route-1 then community add target-as user@R3# set term route-1 then accept user@R3# set term route-2 from route-filter 172.16.2.0/24 exact user@R3# set term route-2 then community add target-ip user@R3# set term route-2 then accept user@R3# set term route-3 from route-filter 172.16.3.0/24 exact user@R3# set term route-3 then community add origin-as user@R3# set term route-3 then accept user@R3# set term route-4 from route-filter 172.16.4.0/24 exact user@R3# set term route-4 then community add origin-ip user@R3# set term route-4 then accept [edit policy-options] user@R3# set community origin-as members origin:64511:3 user@R3# set community origin-ip members origin:172.16.7.7:4 user@R3# set community target-as members target:64511:1 user@R3# set community target-ip members target:172.16.7.7:2
Konfigurieren Sie die AS-Nummer (Autonomous System) und die Router-ID.
[edit routing-options] user@R3# set router-id 192.168.0.3 user@R3# set autonomous-system 64511
Ergebnisse
Bestätigen Sie im Konfigurationsmodus Ihre Konfiguration, indem Sie die Befehle , , und eingeben.show interfaces
show protocols
show policy-options
show routing-options
Wenn die Ausgabe nicht die gewünschte Konfiguration anzeigt, wiederholen Sie die Anweisungen in diesem Beispiel, um die Konfiguration zu korrigieren.
user@R3# show interfaces fe-1/2/3 { unit 0 { family inet { address 10.0.0.13/30; } } } lo0 { unit 0 { family inet { address 192.168.0.3/32; } } }
user@R3# show protocols bgp { group to-R1 { type external; import set-ext-comms; peer-as 64510; neighbor 10.0.0.14; } }
user@R3# show policy-options policy-statement set-ext-comms { term route-1 { from { route-filter 172.16.1.0/24 exact; } then { community add target-as; accept; } } term route-2 { from { route-filter 172.16.2.0/24 exact; } then { community add target-ip; accept; } } term route-3 { from { route-filter 172.16.3.0/24 exact; } then { community add origin-as; accept; } } term route-4 { from { route-filter 172.16.4.0/24 exact; } then { community add origin-ip; accept; } } } community origin-as members origin:64511:3; community origin-ip members origin:172.16.7.7:4; community target-as members target:64511:1; community target-ip members target:172.16.7.7:2;
user@R3# show routing-options router-id 192.168.0.3; autonomous-system 64511;
Wenn Sie mit der Konfiguration des Geräts fertig sind, rufen Sie den Konfigurationsmodus auf .commit
Überprüfung
Vergewissern Sie sich, dass die Konfiguration ordnungsgemäß funktioniert.
Überprüfen der Routen auf Gerät R1
Zweck
Überprüfen Sie auf Gerät R1 die Option 172.16. Routen in der Routing-Tabelle.
Was
user@R1> show route protocol static match-prefix 172.16.* detail inet.0: 15 destinations, 15 routes (15 active, 0 holddown, 0 hidden) 172.16.1.0/24 (1 entry, 1 announced) *Static Preference: 5 Next hop type: Router, Next hop index: 835 Address: 0x9260250 Next-hop reference count: 19 Next hop: 10.0.0.2 via fe-1/2/0.0, selected State: <Active Int Ext> Local AS: 64510 Age: 2:06:08 Task: RT Announcement bits (2): 2-KRT 3-BGP_RT_Background AS path: I Communities: 64510:1 172.16.2.0/24 (1 entry, 1 announced) *Static Preference: 5 Next hop type: Router, Next hop index: 835 Address: 0x9260250 Next-hop reference count: 19 Next hop: 10.0.0.2 via fe-1/2/0.0, selected State: <Active Int Ext> Local AS: 64510 Age: 2:06:08 Task: RT Announcement bits (2): 2-KRT 3-BGP_RT_Background AS path: I Communities: 64510:2 172.16.3.0/24 (1 entry, 1 announced) *Static Preference: 5 Next hop type: Router, Next hop index: 835 Address: 0x9260250 Next-hop reference count: 19 Next hop: 10.0.0.2 via fe-1/2/0.0, selected State: <Active Int Ext> Local AS: 64510 Age: 2:06:08 Task: RT Announcement bits (2): 2-KRT 3-BGP_RT_Background AS path: I Communities: 64510:3 172.16.4.0/24 (1 entry, 1 announced) *Static Preference: 5 Next hop type: Router, Next hop index: 835 Address: 0x9260250 Next-hop reference count: 19 Next hop: 10.0.0.2 via fe-1/2/0.0, selected State: <Active Int Ext> Local AS: 64510 Age: 2:06:08 Task: RT Announcement bits (2): 2-KRT 3-BGP_RT_Background AS path: I Communities: 64510:4
Bedeutung
Die Ausgabe zeigt, dass die regulären Community-Werte an die Routen angehängt sind.
Die Communities sind an statische Routen angehängt, wodurch veranschaulicht wird, dass Communities an Nicht-BGP-Routen angehängt werden können.
Überprüfen der Routen auf Gerät R3
Zweck
Überprüfen Sie auf Gerät R3 die Option 172.16. Routen in der Routing-Tabelle.
Was
user@R3> show route protocol bgp match-prefix 172.16.* detail betsy@tp5# run show route protocol bgp match-prefix 172.16.* detail logical-system R3 inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden) 172.16.1.0/24 (1 entry, 1 announced) *BGP Preference: 170/-101 Next hop type: Router, Next hop index: 611 Address: 0x9260130 Next-hop reference count: 8 Source: 10.0.0.14 Next hop: 10.0.0.14 via fe-1/2/3.0, selected State: <Active Ext> Local AS: 64511 Peer AS: 64510 Age: 1:57:27 Task: BGP_64510.10.0.0.14+54618 Announcement bits (1): 0-KRT AS path: 64510 I Communities: 64510:1 target:64511:1 Accepted Localpref: 100 Router ID: 192.168.0.1 172.16.2.0/24 (1 entry, 1 announced) *BGP Preference: 170/-101 Next hop type: Router, Next hop index: 611 Address: 0x9260130 Next-hop reference count: 8 Source: 10.0.0.14 Next hop: 10.0.0.14 via fe-1/2/3.0, selected State: <Active Ext> Local AS: 64511 Peer AS: 64510 Age: 1:57:27 Task: BGP_64510.10.0.0.14+54618 Announcement bits (1): 0-KRT AS path: 64510 I Communities: 64510:2 target:172.16.7.7:2 Accepted Localpref: 100 Router ID: 192.168.0.1 172.16.3.0/24 (1 entry, 1 announced) *BGP Preference: 170/-101 Next hop type: Router, Next hop index: 611 Address: 0x9260130 Next-hop reference count: 8 Source: 10.0.0.14 Next hop: 10.0.0.14 via fe-1/2/3.0, selected State: <Active Ext> Local AS: 64511 Peer AS: 64510 Age: 1:57:27 Task: BGP_64510.10.0.0.14+54618 Announcement bits (1): 0-KRT AS path: 64510 I Communities: 64510:3 origin:64511:3 Accepted Localpref: 100 Router ID: 192.168.0.1 172.16.4.0/24 (1 entry, 1 announced) *BGP Preference: 170/-101 Next hop type: Router, Next hop index: 611 Address: 0x9260130 Next-hop reference count: 8 Source: 10.0.0.14 Next hop: 10.0.0.14 via fe-1/2/3.0, selected State: <Active Ext> Local AS: 64511 Peer AS: 64510 Age: 1:57:27 Task: BGP_64510.10.0.0.14+54618 Announcement bits (1): 0-KRT AS path: 64510 I Communities: 64510:4 origin:172.16.7.7:4 Accepted Localpref: 100 Router ID: 192.168.0.1
Bedeutung
Die Ausgabe zeigt, dass die regulären Community-Werte an die Routen angehängt bleiben und die erweiterten Community-Werte hinzugefügt werden.