Skip to main content

SSR Device Default Port Layout

The following sections provide information about port connections on Juniper SSR devices.

SSR 120​

The following image of the SSR120 includes Cellular and TAA subvariants. Device Connections

Port Mapping Info​

NamePortDescriptionPCI AddressSpeedType
ge-0-0Port 0WAN 1 network interface0000:04:00.11000WAN
ge-0-1Port 1WAN 2 network interface0000:04:00.01000WAN
ge-0-2Port 2WAN 3 network interface0000:03:00.11000WAN
ge-0-3Port 3LAN network interface0000:03:00.01000LAN
ge-0-4Port 4HA fabric network interface0000:02:00.11000HAFabric
ge-0-5Port 5HA sync network interface0000:02:00.01000HASync

Your SSR device uses Port 0 (ge-0-0) as a default WAN port to contact Mist for zero-touch provisioning (ZTP). You will also be setting up Port 3 (ge-0-3) with a LAN network.

  1. Connect port 0 to an Ethernet WAN link capable of providing the device with:

    • DHCP address assignment
    • Connectivity to the Internet and Mist

  2. Connect port 3 to your LAN devices, including:

    • Mist-managed Juniper EX switches
    • Mist APs
    • User devices

  3. Power on the device.

  4. Use the Mist Claim Code to associate the device with a Mist Organization.

SSR 130​

The following image of the SSR130 includes Cellular and TAA subvariants. Device Connections

Port Mapping Info​

NamePortDescriptionPCI AddressSpeedType
ge-0-0Port 0WAN 1 network interface0000:04:00.31000WAN
ge-0-1Port 1WAN 2 network interface0000:04:00.21000WAN
ge-0-2Port 2WAN 3 network interface0000:04:00.11000WAN
ge-0-3Port 3LAN 1 network interface0000:04:00.01000LAN
ge-0-4Port 4LAN 2 network interface0000:03:00.11000LAN
ge-0-5Port 5LAN 3 network interface0000:03:00.01000LAN
ge-0-6Port 6HA Fabric network interface0000:02:00.11000HA Fabric
ge-0-7Port 7HA Sync network interface0000:02:00.01000HASync

Your SSR device uses Port 0 (ge-0-0) as a default WAN port to contact Mist for zero-touch provisioning (ZTP). You will also be setting up port 3 (ge-0-3) with a LAN network.

  1. Connect port 0 to an Ethernet WAN link capable of providing the device with:

    • DHCP address assignment
    • Connectivity to the Internet and Mist

  2. Connect port 3 to your LAN devices, including:

    • Mist-managed Juniper EX switches
    • Mist APs
    • User devices

  3. Power on the device.

  4. Use the Mist Claim Code to associate the device with a Mist Organization.

SSR 1200​

Device Connections

Port Mapping Info​

NamePortDescriptionPCI AddressSpeedType
mgmt-0-0MGMTManagement interface0000:03:00.01000MGMT
ge-0-0Port 0/0WAN 1 network interface0000:03:00.11000WAN
ge-0-1Port 0/1WAN 2 network interface0000:03:00.21000WAN
ge-0-2Port 0/2WAN 3 network interface0000:03:00.31000WAN
ge-0-3Port 0/3LAN 1 network interface0000:01:00.01000LAN
ge-0-4Port 0/4LAN 2 network interface0000:01:00.11000LAN
ge-0-5Port 0/5HA Fabric network interface0000:01:00.21000HA Fabric
ge-0-6Port 0/6HA Sync network interface0000:01:00.31000HASync
xe-1-0Port 1/0LAN 3 network interface0000:07:00.310000LAN
xe-1-1Port 1/1LAN 4 network interface0000:07:00.210000LAN
xe-1-2Port 1/2LAN 5 network interface0000:07:00.110000LAN
xe-1-3Port 1/3LAN 6 network interfact0000:07:00.010000LAN

Your SSR device uses Port 0/0 (ge-0-0) as a default WAN port to contact Mist for zero-touch provisioning (ZTP). You will also be setting up Port 0/3 (ge-0-3) with a LAN network.

  1. Connect port 0 to an Ethernet WAN link capable of providing the device with:

    • DHCP address assignment
    • Connectivity to the Internet and Mist

  2. Connect port 3 to your LAN devices, including:

    • Mist-managed Juniper EX switches
    • Mist APs
    • User devices

  3. Power on the device.

  4. Use the Mist Claim Code to associate the device with a Mist Organization.

SSR 1300​

Device Connections

Port Mapping Info​

NamePortDescriptionPCI AddressSpeedType
mgmt-0-0MGMTManagement interface0000:01:00.01000MGMT
xe-0-0Port 0/0WAN 1 network interface0000:6a:00.010000WAN
xe-0-1Port 0/1WAN 2 network interface0000:6a:00.110000WAN
xe-0-2Port 0/2WAN 3 network interface0000:6a:00.210000WAN
xe-0-3Port 0/3LAN 1 network interface0000:6a:00.310000LAN
ge-1-0Port 1/0HA Sync network interface0000:19:00.01000HASync
ge-1-1Port 1/1LAN 2 network interface0000:19:00.11000LAN
ge-1-2Port 1/2LAN 3 network interface0000:19:00.21000LAN
ge-1-3Port 1/3LAN 4 network interface0000:19:00.31000LAN
xe-2-0Port 2/0LAN 5 network interface0000:1b:00.310000LAN
xe-2-1Port 2/1LAN 6 network interface0000:1b:00.210000LAN
xe-2-2Port 2/2LAN 7 network interface0000:1b:00.110000LAN
xe-2-3Port 2/3HA Fabric network interface0000:1b:00.010000HAFabric

Your SSR device uses Port 0/0 (xe-0-0 ) as a default WAN port to contact Mist for zero-touch provisioning (ZTP). You will also be setting up Port 0/3 (xe-0-3) with a LAN network.

  1. Connect port 0 to an Ethernet WAN link capable of providing the device with:

    • DHCP address assignment
    • Connectivity to the Internet and Mist

  2. Connect port 3 to your LAN devices, including:

    • Mist-managed Juniper EX switches
    • Mist APs
    • User devices

  3. Power on the device.

  4. Use the Mist Claim Code to associate the device with a Mist Organization.

SSR 1400​

Device Connections

Port Mapping Info​

NamePortDescriptionPCI AddressSpeedType
mgmt-0-0MGMTManagement interface0000:01:00.01000MGMT
xe-0-0Port 0/0WAN 1 network interface0000:6a:00.010000WAN
xe-0-1Port 0/1WAN 2 network interface0000:6a:00.110000WAN
xe-0-2Port 0/2WAN 3 network interface0000:6a:00.210000WAN
xe-0-3Port 0/3LAN 1 network interface0000:6a:00.310000LAN
ge-1-0Port 1/0HA Sync network interface0000:19:00.01000HASync
ge-1-1Port 1/1LAN 2 network interface0000:19:00.11000LAN
ge-1-2Port 1/2LAN 3 network interface0000:19:00.21000LAN
ge-1-3Port 1/3LAN 4 network interface0000:19:00.31000LAN
xe-2-0Port 2/0LAN 5 network interface0000:1b:00.01/10/25GBLAN
xe-2-1Port 2/1LAN 6 network interface0000:1b:00.11/10/25GBLAN
xe-2-2Port 2/2LAN 7 network interface0000:1b:00.21/10/25GBLAN
xe-2-3Port 2/3HA Fabric network interface0000:1b:00.31/10/25GBHAFabric

Your SSR device uses Port 0/0 (xe-0-0 ) as a default WAN port to contact Mist for zero-touch provisioning (ZTP). You will also be setting up Port 0/3 (xe-0-3) with a LAN network.

  1. Connect port 0 to an Ethernet WAN link capable of providing the device with:

    • DHCP address assignment
    • Connectivity to the Internet and Mist

  2. Connect port 0/3 to your LAN devices, including:

    • Mist-managed Juniper EX switches
    • Mist APs
    • User devices

  3. Power on the device.

  4. Use the Mist Claim Code to associate the device with a Mist Organization.

SSR 1500​

Device Connections

Port Mapping Info​

NamePortDescriptionPCI AddressSpeedType
mgmt-0-0MGMTManagement interface0000:41:00.01000MGMT
ge-1-0Port 1/0WAN 1 network interface0000:44:00.01000WAN
ge-1-1Port 1/1WAN 2 network interface0000:44:00.11000WAN
ge-1-2Port 1/2WAN 3 network interface0000:44:00.21000WAN
ge-1-3Port 1/3HA Sync network interface0000:44:00.31000HASync
xe-2-0Port 2/0HA Fabric network interface0000:42:00.01/10/25GBHAFabric
xe-2-1Port 2/1LAN 1 network interface0000:42:00.11/10/25GBLAN
xe-2-2Port 2/2LAN 2 network interface0000:42:00.21/10/25GBLAN
xe-2-3Port 2/3LAN 3 network interface0000:42:00.31/10/25GBLAN
xe-3-0Port 3/0LAN 4 network interface0000:81:00.01/10/25GBLAN
xe-3-1Port 3/1LAN 5 network interface0000:81:00.11/10/25GBLAN
xe-3-2Port 3/2LAN 6 network interface0000:81:00.21/10/25GBLAN
xe-3-3Port 3/3LAN 7 network interface0000:81:00.31/10/25GBLAN
xe-4-0Port 4/0LAN 8 network interface0000:c1:00.01/10/25GBLAN
xe-4-1Port 4/1LAN 9 network interface0000:c1:00.11/10/25GBLAN
xe-4-2Port 4/2LAN 10 network interface0000:c1:00.21/10/25GBLAN
xe-4-3Port 4/3LAN 11 network interface0000:c1:00.31/10/25GBLAN

Your SSR device uses Port 1/0 (ge-1-0 ) as a default WAN port to contact Mist for zero-touch provisioning (ZTP). You will also be setting up Port 2/1 (xe-2-1) with a LAN network.

  1. Connect port 0 to an Ethernet WAN link capable of providing the device with:

    • DHCP address assignment
    • Connectivity to the Internet and Mist

  2. Connect port 2/1 to your LAN devices, including:

    • Mist-managed Juniper EX switches
    • Mist APs
    • User devices

  3. Power on the device.

  4. Use the Mist Claim Code to associate the device with a Mist Organization.