Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Devices Overview

You can manage the devices in your network from the Devices (Configuration > Devices) page. Paragon Automation supports Zero-Touch Provisioning (ZTP), which you can use to provision the device while onboarding the device. For information about ZTP, see Zero-Touch Provisioning Overview.

You can use Paragon Automation to manage both Juniper Networks devices and third-party devices (for example, Cisco IOS XR devices). A managed device refers to a device that the base component of Paragon Automation can discover in a network, and therefore can configure or monitor. An unmanaged device refers to a device that cannot be discovered, configured, or monitored by the base component of Paragon Automation.

Table 1 lists the tasks that you can perform on the Juniper Networks, Nokia, and Cisco IOS-XR devices in this release.

Table 1: Tasks you can perform for Juniper Networks, Nokia, and Cisco IOS XR Devices

Task

Juniper Networks Devices

Nokia Devices

Cisco IOS XR Devices

View Inventory

Yes

Yes

Note:

Chassis view is not supported. You cannot view the features supported or software installed.

Yes

Note:

Chassis view is not supported. You can view the interfaces, features supported, and software installed.

Automatic Resynchronization with Network

Yes

No

Yes

View Active Configuration

Yes

Note:

You can view the active device configuration in the SET, Junos Native, and XML formats.

Yes

Note:

You can view the active device configuration in the Set and XML formats.

Yes

Note:

You can view the active device configuration in the Set and XML formats.

Configuration Versions- View configuration version history, rollback to a previous configuration version, compare different configuration versions, or edit a device configuration

Yes

Yes

Yes

Backup and restore device configuration Yes Yes Only backup of device configuration is supported.
Reboot Device Yes Yes Yes

Upgrade image

Yes

No

No

Note:

Device image must be upgraded manually.

ZTP

Yes

No

No

For a list of all the devices that are supported by Paragon Automation, see Supported Devices.