Adding Access Points to a Floorplan

Adding Juniper Mist™ Access Points (APs) to the floorplan provides a helpful visualization for your deployment.

For Location Services deployments, correct positions of Juniper Mist™ APs are critical, as this ensures location accuracy.

You can add APs in these ways:

• Manually Place an Access Point on a Floorplan

• Autoplacement: Position New Access Points (BETA)

If you've already added APs to a floorplan, you can use the Auto Placement feature to check the positions of the APs on the floorplan and correct any issues. See Autoplacement: Verify Access Point Positions for an Existing Site (BETA).