WAN Assurance Advanced Design Overview
Get started designing Full Stack and high availability deployments for your WAN Edge devices.
WAN Assurance Design Overview
This topic providees a brief overview of the Advanced WAN Assurance designs that this chapter of the guide takes you through. These are the advanced configurations for your hub and spoke SD-WAN deployments.
The Full Stack design combines AI-driven wired, wireless, and WAN solutions.
The high availability design allows for redundancy between your WAN Edge devices.
Both designs require you to have completed a basic WAN Assurance configuration. For an overview of the basic WAN Assurance designs, see WAN Assurance Design Quick Start.
Full Stack Design for WAN Edge Devices
WAN Edge devices deployed in Juniper Mist™ WAN Assurance for Full Stack deployments follow the Full Stack Design for WAN Edge Devices. This design requires an SD-WAN deployment administrator to add WAN Edges, switches, and APs for an end-to-end Full Stack solution that combines Juniper Mist WAN, wired, and wireless.
High Availability Design for WAN Edges
WAN Edge devices deployed in Juniper Mist™ WAN Assurance can be configured for high availability deployments to ensure redundancy between interfaces and devices.
You must first configure the hub and spoke topology referenced in this guide. See the following documentation:
After you've configured the hub and spoke topology, follow the procedure in the High Availability Design for WAN Edge Devices topic to configure interface and device redundancy for your WAN Edges.