show igmp-snooping statistics
Syntax
show igmp-snooping statistics
Description
Display IGMP snooping statistics information.
To display similar information on routing devices or switches that support the Enhanced Layer 2 Software (ELS) configuration style, use the equivalent command show igmp snooping statistics.
Required Privilege Level
view
Output Fields
Table 1 lists
the output fields for the show igmp-snooping statistics command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
Bad length |
IGMP packet has illegal or bad length. |
Bad checksum |
IGMP or IP checksum is incorrect. |
Invalid interface |
Packet was received through an invalid interface. |
Not local |
Number of packets received from senders that are not local, or 0 if not used (on some devices). |
Receive unknown |
Unknown IGMP type. |
Timed out |
Number of timeouts for all multicast groups, or 0 if not used (on some devices). |
IGMP Type |
Type of IGMP message ( |
Received |
Number of IGMP packets received. |
Transmitted |
Number of IGMP packets transmitted. |
Recv Errors |
Number of general receive errors, for packets received that did not conform to IGMP version 1 (IGMPv1), IGMPv2, or IGMPv3 standards. |
Sample Output
show igmp-snooping statistics
user@switch> show igmp-snooping statistics
Bad length: 0 Bad checksum: 0 Invalid interface: 0
Not local: 0 Receive unknown: 0 Timed out: 58
IGMP Type Received Transmitted Recv Errors
Queries: 74295 0 0
Reports: 18148423 0 16333523
Leaves: 0 0 0
Other: 0 0 0
Release Information
Command introduced in Junos OS Release 9.1.