Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show igmp snooping statistics

Syntax

Description

Display IGMP snooping statistics.

Options

none

(Optional) Display detailed information.

brief | detail

(Optional) Display the specified level of output.

bridge-domain bridge-domain-name

(Optional) Display information about a particular bridge domain.

logical-system logical-system-name

(Optional) Display information about a particular logical system, or type ’all’.

virtual-switch virtual-switch-name

(Optional) Display information about a particular virtual switch.

vlan-id vlan-identifier

(Optional) Display information about a particular VLAN.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show igmp snooping statistics command. Output fields are listed in the approximate order in which they appear.

Table 1: show igmp snooping statistics Output Fields

Field Name

Field Description

Level of Output

Routing-instance

Routing instance for IGMP snooping.

All levels

IGMP packet statistics

Heading for IGMP snooping statistics for all interfaces or for the specified interface.

All levels

learning-domain

Appears at end of “IGMP packets statistics” line.

All levels

IGMP Message type

Summary of IGMP statistics:

  • Membership Query—Number of membership queries sent and received.

  • V1 Membership Report—Number of version 1 membership reports sent and received.

  • DVMRP—Number of DVMRP messages sent or received.

  • PIM V1—Number of PIM version 1 messages sent or received.

  • Cisco Trace—Number of Cisco trace messages sent or received.

  • V2 Membership Report—Number of version 2 membership reports sent or received.

  • Group Leave—Number of group leave messages sent or received.

  • Domain Wide Report—Number of domain-wide reports sent or received.

  • V3 Membership Report—Number of version 3 membership reports sent or received.

  • Other Unknown types—Number of unknown message types received.

  • IGMP v3 unsupported type—Number of messages received with unknown and unsupported IGMP version 3 message types.

  • IGMP v3 source required for SSM—Number of IGMP version 3 messages received that contained no source.

  • IGMP v3 mode not applicable for SSM—Number of IGMP version 3 messages received that did not contain a mode applicable for source-specific multicast (SSM).

All levels

Received

Number of messages received.

All levels

Sent

Number of messages sent.

All levels

Rx errors

Number of received packets that contained errors.

All levels

IGMP Global Statistics

Summary of IGMP snooping statistics for all interfaces.

  • Bad Length—Number of messages received with length errors so severe that further classification could not occur.

  • Bad Checksum—Number of messages received with a bad IP checksum. No further classification was performed.

  • Rx non-local—Number of messages received from senders that are not local.

All levels

Sample Output

show igmp snooping statistics

show igmp snooping statistics (SRX1500)

show igmp snooping statistics logical-systems all

show igmp snooping statistics interface (Bridge Domains Configured)

Release Information

Command introduced in Junos OS Release 8.5.