ingress (Chained Composite Next Hop)

Syntax

Enables chained composite next hops for devices handling ingress traffic in the network.

Note:

On MX Series routers containing both Dense Port Concentrators (DPCs) and Modular Port Concentrator (MPC) Flexible PIC Concentrators (FPCs), you must configure the chassis with the enhanced-ip option for enabling chained composite next hops.
The extended-space statement is not supported on ACX Series routers.
The [edit logical-systems] hierarchy level is not applicable on ACX Series routers.
On MX series routers with MPC9 and the previous models of line cards, only the labeled-bgp option and the l3vpn option are supported under the ingress configuration statement; all other configuration options and functionality are not supported.

This statement is disabled by default.

`evpn \| no-evpn`	Enable or disable composite chained next hop for ingress EVPN label-switched paths (LSPs). Note: Chained composite next hops for ingress traffic is enabled by default for EVPN with MPLS signaling, so you don't need to explicitly configure the `evpn` option in those configurations.
`fec129-vpws \| no-fec129-vpws`	Enable or disable composite chained next hop for ingress FEC 129 virtual private wire service (VPWS) LSPs.
`l2ckt \| no-l2ckt`	Enable or disable composite chained next hop for ingress Layer 2 circuit LSPs.
`l2vpn \| no-l2vpn`	Enable or disable composite chained next hop for ingress Layer 2 virtual private network (VPN) LSPs.

The remaining statements are explained separately. See CLI Explorer.

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

This statement was introduced in Junos OS Release 12.1.

labeled-bgp option was introduced in Junos OS Release 12.3.

l2ckt, l2vpn, no-l2ckt, and no-l2vpn options were introduced in Junos OS Release 13.3.

evpn, fec129-vpws, no-evpn, and no-fec129-vpws options were introduced in Junos OS Release 14.1.