Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Unpack the MX301

Unpack the MX301 by following the recommended procedure and check that you have received all the components.

Unpack the MX301

We ship the MX301 in a cardboard carton, secured with foam packing material. The carton also includes an accessory box and a pointer card with links to the quick start instructions. You can use a box cutter or packing knife to slice open the tapes that seals the boxes.

CAUTION:

The MX301 has maximum protection inside the shipping carton. Do not unpack the device until you are ready to mount it.

To unpack the device:

  1. Move the shipping carton to a staging area as close to the installation site as possible. Also ensure that this area provides you with enough room to remove the device and its components.

  2. Position the carton so that the arrows marked on the carton are pointing up.

  3. Open the top flaps on the shipping carton.

  4. Pull out the packing material holding the device in place.

  5. Verify the parts received against the list in Packing List for the MX301.

  6. Save the shipping carton and packing materials in case you need to move or ship the device later.

Packing List for the MX301

The shipment includes a packing list. Check the parts you receive in the shipping carton against the items on the packing list. We ship the parts as per the configuration that you order.

If any part on the packing list is missing, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.

Table 1: Parts List for the MX301 Base Configuration
Component Part Number Quantity

MX301 Chassis

MX301-CHAS

1

Power supply modules (PSUs)

One of the following:

  • JPSU-850W-AC-AFO

  • JPSU-850W-DC-AFO

  • JPSU-850W-HV-AFO

2

Fan modules

JNP-FAN3-1RU

6

AC power cords appropriate for your geographic location (for AC power supply orders only)

See JPSU-850W-AC-AFO.

2

Accessory Kit (see Table 2)

–

1
Table 2: Parts List for the Accessory Kit
Component Quantity

Rack mount kit—JNP301-4PST-RMK (see Table 3)

1

DC power ring terminal lugs, 14-16 AWG, sized for #6 screw (for DC power supply orders only)

8

Grounding ring terminal lug, right-angled and non-insulated

1

SFP and SFP+ transceiver dust cover

16

QSFP transceiver dust cover

10

Philips M5x10 mm screws with washers

2

ESD wrist strap with cable

1

Documentation roadmap card

1
Table 3: Parts List for the Rack Mount Kit (JNP301-4PST-RMK)
Component Quantity

Chassis Brackets

2 (one each for left and right sides)

Front-Mounting Rails

2 (one each for left and right sides)

Rear-Floating Rails

2 (one each for left and right sides)