unit
構文
unit logical-unit-number {
accept-source-mac {
mac-address mac-address {
policer {
input cos-policer-name;
output cos-policer-name;
}
}
}
accounting-profile name;
advisory-options {
downstream-rate rate;
upstream-rate rate;
}
allow-any-vci;
atm-scheduler-map (map-name | default);
auto-configure {
agent-circuit-identifier {
dynamic-profile profile-name;
}
line-identity {
include {
accept-no-ids;
circuit-id;
remote-id;
}
dynamic-profile profile-name;
}
}
backup-options {
interface interface-name;
}
bandwidth rate;
cell-bundle-size cells;
clear-dont-fragment-bit;
compression {
rtp {
maximum-contexts number <force>;
f-max-period number;
queues [queue-numbers];
port {
minimum port-number;
maximum port-number;
}
}
}
compression-device interface-name;
copy-tos-to-outer-ip-header;
demux {
inet {
address-source address;
auto-configure {
address-ranges {
authentication {
password password-string;
username-include {
auth-server-realm realm-string;
delimiter delimiter-character;
domain-name domain-name;
interface-name;
source-address;
user-prefix user-prefix-string;
}
}
dynamic-profile profile-name {
network ip-address {
range name {
low lower-limit;
high upper-limit;
}
}
}
}
}
}
inet6 {
address-source address;
auto-configure {
address-ranges {
authentication {
password password-string;
username-include {
auth-server-realm realm-string;
delimiter delimiter-character;
domain-name domain-name;
interface-name;
source-address;
user-prefix user-prefix-string;
}
}
dynamic-profile profile-name {
network ip-address {
range name {
low lower-limit;
high upper-limit;
}
}
}
}
}
}
}
demux-destination family;
demux-source family;
demux-options {
underlying-interface interface-name;
}
description text;
etree-ac-role (leaf | root);
interface {
l2tp-interface-id name;
(dedicated | shared);
}
dialer-options {
activation-delay seconds;
callback;
callback-wait-period time;
deactivation-delay seconds;
dial-string [dial-string-numbers];
idle-timeout seconds;
incoming-map {
caller caller-id | accept-all;
initial-route-check seconds;
load-interval seconds;
load-threshold percent;
pool pool-name;
redial-delay time;
watch-list {
[routes];
}
}
}
disable;
disable-mlppp-inner-ppp-pfc;
dlci dlci-identifier;
drop-timeout milliseconds;
dynamic-call-admission-control {
activation-priority priority;
bearer-bandwidth-limit kilobits-per-second;
}
encapsulation type;
epd-threshold cells plp1 cells;
family family-name {
... the family subhierarchy appears after the main [edit interfaces interface-name unit logical-unit-number] hierarchy ...
}
fragment-threshold bytes;
host-prefix-only;
inner-vlan-id-range start start-id end end-id;
input-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap |
swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
vlan-id number;
}
interleave-fragments;
inverse-arp;
layer2-policer {
input-policer policer-name;
input-three-color policer-name;
output-policer policer-name;
output-three-color policer-name;
}
link-layer-overhead percent;
minimum-links number;
mrru bytes;
multicast-dlci dlci-identifier;
multicast-vci vpi-identifier.vci-identifier;
multilink-max-classes number;
multipoint;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (disable | seconds);
output-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap |
swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
}
passive-monitor-mode;
peer-unit unit-number;
plp-to-clp;
point-to-point;
ppp-options {
mru size;
mtu (size | use-lower-layer);
chap {
access-profile name;
default-chap-secret name;
local-name name;
passive;
}
compression {
acfc;
pfc;
}
dynamic-profile profile-name;
ipcp-suggest-dns-option;
lcp-restart-timer milliseconds;
loopback-clear-timer seconds;
ncp-restart-timer milliseconds;
pap {
access-profile name;
default-pap-password password;
local-name name;
local-password password;
passive;
}
}
pppoe-options {
access-concentrator name;
auto-reconnect seconds;
(client | server);
service-name name;
underlying-interface interface-name;
}
pppoe-underlying-options {
access-concentrator name;
direct-connect;
dynamic-profile profile-name;
max-sessions number;
}
proxy-arp;
service-domain (inside | outside);
shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
queue-length number;
}
short-sequence;
targeted-distribution;
transmit-weight number;
(traps | no-traps);
trunk-bandwidth rate;
trunk-id number;
tunnel {
backup-destination address;
destination address;
key number;
routing-instance {
destination routing-instance-name;
}
source source-address;
ttl number;
}
vci vpi-identifier.vci-identifier;
vci-range start start-vci end end-vci;
vpi vpi-identifier;
vlan-id number;
vlan-id-range number-number;
vlan-tags inner tpid.vlan-id outer tpid.vlan-id;
family family {
accounting {
destination-class-usage;
source-class-usage {
(input | output | input output);
}
}
access-concentrator name;
address address {
... the address subhierarchy appears after the main [edit interfaces interface-name unit logical-unit-number family family-name] hierarchy ...
}
bundle interface-name;
core-facing;
demux-destination {
destination-prefix;
}
demux-source {
source-prefix;
}
direct-connect;
duplicate-protection;
dynamic-profile profile-name;
filter {
group filter-group-number;
input filter-name;
input-list [filter-names];
output filter-name;
output-list [filter-names];
}
interface-mode (access | trunk);
ipsec-sa sa-name;
keep-address-and-control;
mac-validate (loose | strict);
max-sessions number;
mtu bytes;
multicast-only;
no-redirects;
policer {
arp policer-template-name;
input policer-template-name;
output policer-template-name;
}
primary;
protocols [inet iso mpls];
proxy inet-address address;
receive-options-packets;
receive-ttl-exceeded;
remote (inet-address address | mac-address address);
rpf-check {
fail-filter filter-name
mode loose;
}
sampling {
input;
output;
}
service {
input {
post-service-filter filter-name;
service-set service-set-name <service-filter filter-name>;
}
output {
service-set service-set-name <service-filter filter-name>;
}
}
service-name-table table-name
targeted-options {
backup backup;
group group;
primary primary;
weight ($junos-interface-target-weight | weight-value);
}
(translate-discard-eligible | no-translate-discard-eligible);
(translate-fecn-and-becn | no-translate-fecn-and-becn);
translate-plp-control-word-de;
unnumbered-address interface-name destination address destination-profile profile-name;
vlan-id number;
vlan-id-list [number number-number];
address address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
destination address;
destination-profile name;
eui-64;
primary-only;
multipoint-destination address {
dlci dlci-identifier;
epd-threshold cells <plp1 cells>;
inverse-arp;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (disable | seconds);
shaping {
(cbr rate | rtvbr burst length peak rate sustained rate | vbr burst length peak rate sustained rate);
queue-length number;
}
vci vpi-identifier.vci-identifier;
}
preferred;
primary;
(vrrp-group | vrrp-inet6-group) group-number {
(accept-data | no-accept-data);
advertise–interval seconds;
authentication-type authentication;
authentication-key key;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost number;
}
priority-hold-time seconds;
route ip-address/prefix-length routing-instance instance-name priority-cost cost;
}
virtual-address [addresses];
virtual-link-local-address ipv6–address;
vrrp-inherit-from {
active-interface interface-name;
active-group group-number;
}
}
}
}
}
階層レベル
[edit interfaces interface-name], [edit logical-systems logical-system-name interfaces interface-name], [edit interfaces interface-set interface-set-name interface interface-name]
説明
物理デバイスに論理インターフェイスを設定します。物理デバイスを使用するには、論理インターフェイスを設定する必要があります。
オプション
logical-unit-number- 論理ユニットの番号。
範囲: demux、PPPoE、および疑似回線静的インターフェイスの場合は0〜1,073,741,823。0 から 16,385 (その他のすべてのスタティック インターフェイス タイプの場合)。
etree-ac-role (leaf | root)- インターフェイスをリーフまたはルートとして設定します。
残りのステートメントについては、個別に説明します。 詳細については、CLI エクスプローラー でステートメントを検索するか、「構文」セクションでリンクされたステートメントをクリックしてください。
必要な権限レベル
interface—設定でこのステートメントを表示します。
interface-control—設定にこのステートメントを追加します。
リリース情報
Junos OSリリース7.4より前に導入されたステートメント。
Junos OSリリース18.3R1では、静的疑似回線インターフェイスの範囲が1,073,741,823に増加しました。