Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?





Hierarchy Level

Release Information

Statement introduced before Junos OS Release 7.4.


For ATM2 IQ interfaces configured to use Layer 2 circuit trunk mode, configure a scheduler so that unused bandwidth from any inactive trunk is proportionally shared among the active trunks.

During congestion, each trunk receives a proportional share of the leftover bandwidth, thus minimizing the latency on each trunk.


rate—Peak rate, in bits per second (bps) or cells per second (cps). You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), (1,000,000), or g (1,000,000,000). You can also specify a value in cells per second by entering a decimal number followed by the abbreviation c; values expressed in cells per second are converted to bits per second by means of the formula 1 cps = 384 bps.

Range: 1,000,000 through 542,526,792 bps

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.