Statement introduced before Junos OS Release 7.4.
For ATM point-to-point logical interfaces only, configure the virtual circuit identifier (VCI) and virtual path identifier (VPI).
To configure a VPI for a point-to-multipoint interface, specify the VPI in the multipoint-destination statement.
VCIs 0 through 31 are reserved for specific ATM values designated by the ATM Forum.
vci-identifier—ATM virtual circuit identifier. Unless you configure the interface to use promiscuous mode, this value cannot exceed the highest-numbered VC configured for the interface with the maximum-vcs option of the vpi statement.
Range: 0 through 4089 or 0 through 65,535 with promiscuous mode, with VCIs 0 through 31 reserved.
vpi-identifier—ATM virtual path identifier.
Range: 0 through 255
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.