[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Removing the Fan Tray

In the rear of the chassis, the fan tray is located on the right of the chassis. The fan tray weighs about 6.8 lb (3.08 kg).

To remove the fan tray (see Figure 72 ):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage.
  2. Loosen the captive screw on each side of the fan tray faceplate.
  3. Grasp both sides of the fan tray and pull it out approximately 1 to 3 inches.
  4. Place one hand under the fan tray to support it and pull the fan tray completely out of the chassis.

Figure 72: Removing the Fan Tray

Image g004225.gif


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]