This manual describes hardware components, installation, basic configuration, and basic troubleshooting procedures for the Juniper Networks SRX 5600 services gateway. It explains how to prepare your site for device installation, unpack and install the hardware, power on the device, perform initial software configuration, and perform routine maintenance. After completing the installation and basic configuration procedures covered in this manual, see the JUNOS software configuration guides for information about further JUNOS software configuration.
 |
Note: For additional information about Juniper Networks services gateways and the I/O cards (IOCs) and Services Processing Cards (SPCs) they support—either corrections to or information that might have been omitted from this guide—see the hardware release notes at https://www.juniper.net/. |