[ Contents] [ Prev] [ Next] [ Report an Error]

Replacing the Craft Interface

The craft interface is located above the card cage, as shown in Figure 3. It houses the alarm relay interface ports and indicates status of services gateway components.

The craft interface is hot-insertable and hot-removable. It weighs approximately 1.5 lb (0.68 kg). When you install the craft interface, allow several minutes for the display to reflect the current state of the device.

Figure 3: Front View of a Fully Configured Services Gateway Chassis

Image g030200.gif

To replace the craft interface, use the following procedures:

[ Contents] [ Prev] [ Next] [ Report an Error]