[ Contents] [ Prev] [ Next] [ Report an Error]

Removing the Craft Interface

To remove the craft interface (see Figure 4):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage.
  2. Detach any external devices connected to the craft interface.
  3. Loosen the captive screws at the top left and right corners of the craft interface faceplate.
  4. Grasp the craft interface faceplate and carefully tilt it toward you until it is horizontal.
  5. Disconnect the ribbon cable from the back of the faceplate by gently pressing on both sides of the latch with your thumb and forefinger. Remove the craft interface from the chassis.

Figure 4: Removing the Craft Interface

Image g004039.gif


[ Contents] [ Prev] [ Next] [ Report an Error]