interfaces (QFX Series, ACX Series)
Syntaxe
Les instructions suivantes et leurs sous-instructions associées ne sont pas prises en charge sur les commutateurs OCX Series : auto-negotiation, speed, ethernet-switching, fcoe-lag, mc-aefibrechannel-optionsvlanfibre-channelvlan-idet .vlan-tagging
interfaces {
aex {
disable;
aggregated-ether-options {
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
(fcoe-lag | no-fcoe-lag);
flexible-vlan-tagging;
(flow-control | no-flow-control);
lacp mode {
admin-key key;
force-up;
periodic interval;
system-id mac-address;
}
link-speed speed;
local-bias;
loopback;
no-loopback;
minimum-links number;
}
mc-ae {
chassis-id chassis-id;
mc-ae-id mc-ae-id;
mode (active-active);
status-control (active | standby);
}
description text;
gratuitous-arp-reply | no-gratuitous-arp-reply)
hold-time down milliseconds up milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
interface-range {
powersaving {
member-range starting-interface-name to ending-interface-name;
unused;
}
interface-range-name {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
}
}
(auto-negotiation| no-auto-negotiation);
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
(flow-control | no-flow-control);
link-mode mode;
speed (auto-negotiation | speed);
}
hold-time milliseconds down milliseconds;
member interface-name;
member-range starting-interface-name to ending-interface-name;
unused;
mtu bytes;
unit logical-unit-number {
disable;
description text;
family family-name {...}
(traps | no traps);
vlan-id vlan-id-number;
}
}
lo0 {
disable;
description text;
hold-time milliseconds down milliseconds;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
}
}
mex {
disable;
description text;
hold-time milliseconds down milliseconds;
(gratuitous-arp-reply | no-gratuitous-arp-reply);
no-gratuitous-arp-request;
traceoptions;
traps;
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
}
traps;
vlan-id vlan-id-number;
}
vlan-tagging;
vlan {
disable;
description text;
(gratuitous-arp-reply| no-gratuitous-arp-reply);
hold-time milliseconds down milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
description text;
disable;
family {
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
}
}
fc-0/0/port {
fibrechannel-options {
bb-sc-n;
(loopback | no-loopback);
speed (auto-negotiation | 2g | 4g | 8g);
}
unit logical-unit-number {
disable;
description text;
family {
fibre-channel {
port-mode np-port;
}
(traps | no traps);
}
ge-0/0/port {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
primary;
}
}
(auto-negotiation | no-auto-negotiation);
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
flexible-vlan-tagging;
(flow-control | no-flow-control);
link-mode mode;
loopback;
no-loopback;
speed (auto-negotiation | speed);
}
gratuitous-arp-reply| no-gratuitous-arp-reply);
hold-time milliseconds down milliseconds;
mac
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
description text;
disable;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
vrrp-group group-id {
(accept-data | no-accept-data);
advertise-interval seconds;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost priority;
priority-cost priority;
}
priority-hold-time seconds;
route prefix/prefix-length routing-instance instance-name priority-cost priority;
}
}
virtual-address [ addresses ];
}
xe-0/0/port {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
(primary | backup);
}
}
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
flexible-vlan-tagging;
(flow-control | no-flow-control);
loopback;
no-loopback;
}
(gratuitous-arp-reply| no-gratuitous-arp-reply
hold-time milliseconds down milliseconds;
mac
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
fibre-channel {
port-mode (f-port | np-port);
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
}
Niveau hiérarchique
[edit]
Description
Configurez les interfaces sur les QFX Series, ACX Series et OCX Series.
Les instructions suivantes et leurs sous-instructions associées ne sont pas prises en charge sur les commutateurs OCX Series : auto-negotiation, ethernet-switching, fcoe-lag, fibre-channel, vlan-idfibrechannel-optionsspeedmc-aevlanetvlan-tagging
La plupart des instructions de configuration standard de Junos OS sont disponibles dans Junos OS pour un commutateur. Cette rubrique répertorie les instructions Junos OS que vous utilisez couramment lors de la configuration d’un commutateur, ainsi que les instructions ajoutées pour prendre en charge les commutateurs uniquement.
Consultez l’explorateur de fonctionnalités pour connaître les plates-formes de prise en charge de la fonction d’économie d’énergie.
Options
Aex: permet de configurer une interface Ethernet agrégée.
xe-0/0/port/—Configurez une interface Ethernet 10 Gigabit.
ge-0/0/port/—Configurez une interface Gigabit Ethernet.
fc-0/0/port/—Configurez une interface Fibre Channel.
meX/ : permet de configurer une interface de gestion.
mc-ae : configurez une interface Ethernet agrégée multichâssis (MC-AE).
Les autres énoncés sont expliqués séparément. Reportez-vous à la section Explorateur CLI.
Niveau de privilège requis
interface : permet d’afficher cette instruction dans la configuration.
interface-control : permet d’ajouter cette instruction à la configuration.
Informations sur la version
Déclaration introduite dans Junos OS version 11.1.
Prise en charge des déclarations pour la série QFX introduite dans Junos OS EVO version 21.3