Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

vrrp-group

 

Syntax

Hierarchy Level

Release Information

Statement introduced before Junos OS Release 7.4.

Statement introduced in Junos OS 11.3 for the QFX Series.

Statement introduced in Junos OS Release 14.1x53-D20 for the OCX Series.

Description

Configure a Virtual Router Redundancy Protocol (VRRP) IPv4 group. As of Junos OS Release 13.2, VRRP nonstop active routing (NSR) is enabled only when you configure the nonstop-routing statement at the [edit routing-options] or [edit logical system logical-system-name routing-options hierarchy level.

Options

group-id—VRRP group identifier. If you enable MAC source address filtering on the interface, you must include the virtual MAC address in the list of source MAC addresses that you specify in the source-address-filter statement. MAC addresses ranging from 00:00:5e:00:53:00 through 00:00:5e:00:53:ff are reserved for VRRP, as defined in RFC 2338. The VRRP group number must be the decimal equivalent of the last hexadecimal byte of the virtual MAC address.

Range: 0 through 255

Note

Under certain circumstances, the group identifier that you enter must be different from any other group identifiers that you configured for logical units of this same physical interface. See Configuring Basic VRRP Support for more information.

The remaining statements are explained separately. Click a linked statement in the Syntax section for more information about that statement.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.