Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Front-and-Rear-Mounting the NSM4000 Appliance Flush to a Rack

    This mounting option is used for larger chassis that require additional support when mounted on the rack-mount system.

    To mount the NSM4000 appliance front and rear flush to a rack:

    1. Insert four rack-mount screws on each side of the appliance to secure the front of the chassis to the equipment rack.
    2. Slide the rear-mount rail brackets into the backs of the front rails on either side of the chassis and align with your rear equipment rack posts, as shown in Figure 1.
    3. Secure the rear-mount rail brackets to your equipment rack with two rack-mount screws each.
    4. Insert locking screws on the sides of the rear-mount brackets to secure the front and rear mounting brackets in place.

      Figure 1: Front-and-Rear-Mounting Flush to a Rack

Flush to a Rack
    5. Verify that the mounting screws on one side of the rack are aligned with the mounting screws on the opposite side and that the appliance is level.

    Published: 2014-10-30