Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Multicast Static Routes

 

For each static entry in the multicast routing table, you must configure the following information:

  • Multicast Group IP—Enter the IP address of the group that receives multicast traffic.

  • Source IP—Enter the IP address of the source of the multicast traffic.

  • Incoming Interface—Select the interface on the device that receives multicast traffic.

  • Outgoing Information—Enter the information that defines the interface and IP address the device uses to forward multicast traffic.

    • Outgoing Interface—Select the interface on the device that forwards multicast traffic.

    • Outgoing Group—Security devices can translate the original multicast group address to a different multicast group address on the outgoing interface. Use this option to specify the translated multicast group address for the outgoing interface (you configure the original group address in the Multicast Group IP setting).