Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Route Resolution (NSM Procedure)

    You can configure a routing table to accept routes from specific routing tables to enable the device to manage and route the traffic effectively between a source host and destination host. You can configure a routing table to use specific import policies to produce a route resolution table to resolve routes.

    To configure a route resolution table in NSM:

    1. In the navigation tree, select Device Manager > Devices.
    2. In the Devices list, double-click the device to select it.
    3. Click the Configuration tab.
    4. In the configuration tree, expand Routing Options.
    5. Select Resolution.
    6. Add or modify the parameters as specified in Table 1.
    7. Click one:
      • OK—To save the changes.
      • Cancel—To cancel the modifications.
      • Apply—To apply the routing option settings.

    Note: After you make changes to a device configuration, you must push that updated device configuration to the physical security device for those changes to take effect. You can update multiple devices at one time. See the Updating Devices section in the Network and Security Manager Administration Guide for more information.

    Table 1: Route Resolution Fields



    Your Action


    Specifies the comment for the route resolution.

    Enter a comment.


    Specifies the name of the routing table for which the import policies and the resolution routes are configured.

    1. Expand the Resolution tree and select Rib.
    2. Click the New button or select a routing table and click the Edit button.
    3. Enter the name and comment for the routing table and specify the route import policies and the resolution routes.


    Specifies the filter policy for the resolution routes.

    1. Expand the Resolution tree and select Tracefilter.
    2. Specify the filter policies for the routing table.


    Defines tracing options for route resolution.

    1. Expand the Resolution tree and select Traceoptions.
    2. Expand the Traceoptions tree and set up the file and flag parameters.

    Published: 2013-01-06