Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Static Label Switched Path (NSM Procedure)

    To configure a static label switched path:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure a static label switched path.
    3. Click the Configuration tab. In the configuration tree, select Protocols > Mpls > Static Label Switched Path.
    4. Click + to configure a static label switched path as described in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the static label switch path parameters.

    Table 1: Static Label Switched Path Configuration Details

    Option

    Function

    Your Action

    Mpls > Static Label Switched Path

    Name

    Specifies the path name.

    Enter a path name.

    Comment

    Supplies a descriptive comment for the path.

    (Optional) Enter a comment.

    Mpls > Static Label Switched Path > Bypass

    bypass / transit / ingress

    Specifies the label switched path session status.

    • bypass—Sessions for bypass label switched paths.
    • transit—Sessions that transit through this device.
    • ingress—Sessions that originate from this device.

    Select an option.

    Mpls > Static Label Switched Path > Bypass > bypass

    Comment

    Supplies a descriptive comment for bypass.

    (Optional) Enter a comment.

    Bandwidth

    Specifies the bandwidth to reserve.

    Enter the bandwidth.

    Description

    Specifies the text description of the bypass label switched path.

    Enter a description.

    Next Hop

    Specifies the address or interface of next-hop device.

    Enter an address or interface.

    Push

    Specifies the label to push.

    Enter the push value. Rage vary from 0 through 1,048,575.

    To

    Specifies the address of the egress device.

    Enter an address of the egress device.

    Mpls > Static Label Switched Path > Bypass > transit

    Name

    Specifies the name for transit.

    Set the name as a value. Range vary from 1,000,000 through 1,048,575.

    Comment

    Supplies a descriptive comment for transit.

    (Optional) Enter a comment.

    Bandwidth

    Specifies the bandwidth to reserve.

    Enter the bandwidth.

    Description

    Specifies the text description of the transit label switched path.

    Enter a description.

    Next Hop

    Specifies the address or interface of next-hop device.

    Enter an address or interface.

    Mpls > Static Label Switched Path > Bypass > transit > Link Protection

    Comment

    Supplies a descriptive comment for transit link protection.

    (Optional) Enter a comment.

    Bypass Name

    Specifies the bypass label switched path name.

    Enter a bypass label switched path name.

    Mpls > Static Label Switched Path > Bypass > transit > Node Protection

    Comment

    Supplies a descriptive comment for transit node protection.

    (Optional) Enter a comment.

    Bypass Name

    Specifies the bypass label switched path name.

    Enter a bypass label switched path name.

    Next Next Label

    Specifies the label expected by next-next-hop device.

    Enter the next next label value. Rage vary from 0 through 1,048,575.

    Mpls > Static Label Switched Path > Bypass > transit > Swap

    swap / pop

    Specifies the virtual LAN tag operations.

    Select an option.

    Note: If you select swap, enter a swap value. range vary from 0 through 1,048,575.

    Mpls > Static Label Switched Path > Bypass > ingress

    Comment

    Supplies a descriptive comment for bypass ingress.

    (Optional) Enter a comment.

    Bandwidth

    Specifies the bandwidth to reserve.

    Enter the bandwidth.

    Class Of Service

    Specifies the Class of Service value.

    Enter the Class of Service value. Range vary from 0 through 7.

    Description

    Specifies the text description of the ingress label switched path.

    Enter a description.

    Metric

    Specifies the metric value.

    Enter the metric value. Range vary from 0 through 16,777,215.

    Next Hop

    Specifies the address or interface of next-hop device.

    Enter an address or interface.

    No Install To Address

    Specifies not to install host route to address into routing tables.

    Select the check box to enable this feature.

    Preference

    Specifies the preference value.

    Enter the preference value. Range vary from 0 through 4,294,967,295.

    To

    Specifies the address of the egress device.

    Enter an address of the egress device.

    Push

    Specifies the label to push.

    Enter the push value. Rage vary from 0 through 1,048,575.

    Mpls > Static Label Switched Path > Bypass > Ingress > Install

    Name

    Specifies the name of the destination prefix.

    Enter the name for the destination prefix.

    Comment

    Supplies a descriptive comment for ingress install.

    (Optional) Enter a comment.

    Active

    Specifies that you can install prefix into forwarding tables.

    Select the check box to enable this feature.

    Mpls > Static Label Switched Path > Bypass > Ingress > Link Protection

    Comment

    Supplies a descriptive comment for ingress link protection.

    (Optional) Enter a comment.

    Bypass Name

    Specifies the bypass label switch path name.

    Enter a bypass name.

    Mpls > Static Label Switched Path > Bypass > Ingress > Node Protection

    Comment

    Supplies a descriptive comment for ingress node protection.

    (Optional) Enter a comment.

    Bypass Name

    Specifies the bypass label switch path name.

    Enter a bypass name.

    Next Next Label

    Specifies the label expected by next-next-hop device.

    Enter the next-next label value. Rage vary from 0 through 1,048,575.

    Mpls > Static Label Switched Path > Bypass > Ingress > Policing

    Comment

    Supplies a descriptive comment for ingress policing.

    (Optional) Enter a comment.

    Filter

    Specifies the name of filter to use for policing label switch paths.

    Select an option from the list.

    No Auto Policing

    Specifies to turn off automatic policing for this label switch path.

    Select the check box to enable this feature.

    Published: 2013-01-06