Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring CoS Traffic Control Profiles (NSM Procedure)

    You can configure traffic shaping and scheduling profiles for Gigabit Ethernet IQ, Channelized IQ PICs, and AS PIC FRF.16 LSQ interfaces.

    To configure CoS Traffic Control Profiles in NSM:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure CoS Restricted Queues.
    3. Click the Configuration tab. In the configuration tree, expand Class of Service.
    4. Select Traffic Control Profiles.
    5. Add or modify settings as specified in Table 1.
    6. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Traffic Control profile Configuration Details

    Task

    Your Action

    Configure traffic shaping and scheduling profiles for Gigabit Ethernet IQ, Channelized IQ PICs, and AS PIC FRF.16 LSQ interfaces.

    1. In the Name box, enter the name of the traffic-control profile.
    2. Select the scheduler map.
    3. Expand traffic-control-profiles.
    4. Select the following:
      • Select Delay Buffer Rate as default value and set the delay buffer rate.
      • Select Guaranteed Rate if you do not configure delay buffer rate. The delay buffer rate calculation is based on the guaranteed rate.

        Note: On LSQ interfaces, you can configure the guaranteed rate as a percentage from 1 through 100.

        On IQ and IQ2 interfaces, you can configure the guaranteed rate as an absolute rate from 1000 through 160,000,000,000 bits per second.

      • Select Shaping Rate if you do not configure delay buffer rate or guaranteed rate. The delay buffer rate calculation is based on the shaping rate.

    Published: 2013-01-06