Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Routing Engine to Reboot or Halt on Hard Disk Errors (NSM Procedure)

    You can configure a Routing Engine to halt or reboot automatically when a hard disk error occurs. A hard disk error may cause a Routing Engine to enter a state in which it responds to local pings and interfaces remain up, but no other processes are responding.

    To Configure Routing Engine to reboot or halt:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device to select it.
    3. Click the Configuration tab. In the configuration tree, select Chassis > Routing Engine.
    4. Add or modify Routing Engine settings as specified in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Chassis Routing Engine Configuration Details

    OptionYour Action

    On disk failure.

    From the Disk Failure Action list, select the action to instruct the router on detecting the hard disk errors on the Routing Engine.

    Published: 2013-01-06