Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring IF-MAP Client Settings on the Infranet Controller (NSM Procedure)

    You must identify the IF-MAP server to each Infranet Controller and SA appliance IF-MAP client. To add the server, you specify the IF-MAP URL of the server and how to authenticate to the server. Match the URL and security settings to equal those on the IF-MAP server(s) to which the IF-MAP client will connect.

    To configure IF-MAP client settings on the Infranet Controllers or SA appliances that will be IF-MAP clients:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the Infranet Controller for which you want to configure IF-MAP client settings.
    3. Click the Configuration tab. In the configuration tree, select System > IF–MAP Federation > Overview.
    4. From the IF-MAP Configuration list, select IF-MAP Client.
    5. Type the server URL for the IF-MAP Web service on the IF-MAP server. For a Juniper IF-MAP server, use:


      FQDN is the fully qualified domain name of the replica's internal or external interface; for a cluster, the FQDN of the internal or external VIP should be used.

    6. Under Authentication Type, select the Client Authentication Method: Basic or Certificate.
      • If you select Basic, enter a username and password. The same information should be added to the IF-MAP server.
      • If you select Certificate, select the device certificate to use.
      • Ensure that the certificate of the CA that signed the IF-MAP server certificate is added from the System > Configuration > Certificates > Trusted Server CAs page.

        The IF-MAP client validates the IF-MAP server certificate: if validation fails, the connection fails. Ensure that the hostname in the IF-MAP URL on the client machine matches the hostname of the server certificate on the IF-MAP server, and that the CA that signed the server certificate is configured as a trusted server CA on the IF-MAP client.

    7. Click OK to save the changes.

    Published: 2012-11-28