Configuring the User Record Synchronization Server (NSM Procedure)

To set up the user record synchronization server you must define its peer nodes (optional) and the clients that can access this server.

To configure user record synchronization server:

  1. In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree tab, and then double-click the Secure Access device for which you want to configure a user record synchronization server.
  2. Click the Configuration tab, and select System > Configuration > User Record Synchronization > This Server.
  3. Under Peer Servers tab, click New.
  4. Enter the peer server node name in the Server Node Name.
  5. Enter the peer IP address in the Internal Address box.
  6. Click OK. Data is replicated from the primary or backup server to its peer servers. If the primary is not available, user data is sent to the backup. User data is then replicated to the peer servers.
  7. For each client you want to synchronize with this server, enter the client’s name and IP address and click OK. Once added, peer servers will have a colored icon next to their name indicating their connection status. Node status is provided to client nodes and LAS mapping servers as described in Table 82.
  8. Click OK to save the changes.

Table 82: Server Color Codes

ColorDescription

Green

Connected

Yellow

Connecting

Gray

Not Connected

Related Documentation