Configuring an AS Path Group in a BGP Routing Policy (NSM Procedure)

Autonomous System (AS) path group consists of multiple AS paths. You can define match conditions based on the AS path groups. You can create named AS paths under an AS path group and then include the AS path group in a routing policy.

To configure an AS path group for a BGP routing policy in NSM:

  1. In the navigation tree, select Device Manager > Devices.
  2. In the Devices list, double-click the device to select it.
  3. Click the Configuration tab.
  4. In the configuration tree, expand Policy Options.
  5. Select As Path Group.
  6. Add or modify the parameters as specified in Table 42.
  7. Click one:
    • OK—To save the changes.
    • Cancel—To cancel the modifications.
    • Apply — To apply the protocol settings.

Note: After you make changes to a device configuration, you must push that updated device configuration to the physical security device for those changes to take effect. You can update multiple devices at one time. See the Updating Devices section in the Network and Security Manager Administration Guide for more information.

Table 42: AS Path Group Configuration Details

Option

Function

Your Action

Name

Specifies the name of the AS path group.

Enter a name.

Comment

Specifies the comment for the AS path group.

Enter a comment.

As Path

Specifies an AS path to be included in the AS path group. Specifies the name and comment for the AS path and specifies the path as an AS path number.

  1. Select As Path.
  2. Click the New button or select an AS path and click the Edit button.
  3. Specify the name, comment and path.
  4. Click OK, then click OK again.