Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Disabling Path Management on a Broadband Gateway or Peer Group

    You can temporarily disable path management on the MobileNext Broadband Gateway so that echo-request messages are not sent from the P-GW to a peer.

    When you configure the broadband gateway as a P-GW, the path management options are automatically enabled using the default echo-timing values. You can configure the path-management option to temporarily disable path management on the entire gateway, or on the control plane, data plane, or interface (S5, S8, Gn, or Gp) level.

    • To disable path management on the Broadband Gateway:
      [edit unified-edge mobile gateways ggsn-pdn-gateway MBG1 gtpuser@host# set path-management disable

      To enable echo-request processing again on the GGSN/P-GW:

      [edit unified-edge mobile gateways ggsn-pdn-gateway MBG1 gtpuser@host# set path-management enable
    • To disable path management on a peer group:
      [edit unified-edge mobile gateways ggsn-pgw MBG1 gtp peer-groups peer-grp-1]user@host# set path-management disable

      To enable path management again on the peer group:

      [edit unified-edge mobile gateways ggsn-pgw MBG1 gtp peer-groups peer-grp-1]user@host# set path-management enable

    Published: 2011-11-17