Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Broadband Gateway Home PLMNs and Gateways

    The MobileNext Broadband Gateway establishes a context and framework for mobile operations under the unified edge. The basic mobile framework unit is the gateway, which can be used as either a 3G gateway GPRS support node (GGSN) or 4G Packet Data Network Gateway (P-GW). The gateway also has one or more home public land mobile networks (HPLMNs) associated with it.

    Before you begin configuring HPLMNs and gateways on the broadband gateway, you should have done the following:

    • Configured access to the MobileNext Broadband Gateway

    To establish the mobile context, configure a gateway. You also configure a list of HPLMNs that this gateway and its access point names (APNs) recognize. The HPLMNs consist of the mobile country code (MCC) and mobile network code (MNC).

    Note: At initial release, the broadband gateway supports only one gateway.

    To configure the gateway and HPLMN list:

    1. Configure a name for the gateway.
      [edit unified-edge gateways ggsn-pgw ]user@host# set MGB1

      Note: You can include dashes or underscores, but many special characters are not allowed in the gateway name.

    2. Configure a list of HPLMNs for the gateway.
      [edit unified-edge gateways ggsn-pgw MBG1]user@host# set home-plmn mcc 001 mnc 01

      Note: The MMC/MNC combination 00101 is reserved for test networks.

    Published: 2011-11-18