Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Configuring GTP Prime Peers

    CDRs are transferred to a charging gateway using GTP Prime. The charging gateway is the GTP Prime peer. The charging gateway peer inherits the global GTP Prime values. You configure the GTP Prime peer only if you want to override any of the global GTP Prime values.

    To configure the GTP Prime peer to transfer CDRs:

    1. Specify the name of the CGF peer for which you are configuring GTP Prime properties. Use this peer name to configure the peer order in the transport profile.
      [edit unified-edge gateways ggsn-pgw MBG1 charging gtpp]user@host# edit peer peer-name
    2. Specify the destination IPv4 address of the CGF peer.
      [edit unified-edge gateways ggsn-pgw MBG1 charging gtpp peer peer-name]user@host# set destination-ipv4-address ip-address
    3. (Optional) Specify any of the global GTP Prime options that you want to override for this charging gateway.
     

    Related Documentation

     

    Published: 2011-11-16