Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    How to Change a Transport Profile

    This example shows how to change a transport profile using Maintenance Mode.

    Requirements

    This example uses the following hardware and software components:

    • An installed and operational MX chassis
    • Junos OS Mobility package

    Overview

    This section shows an example of how to put the transport profile trans_p into Mainten\ance Mode . Once in Maintenance mode, operators can make changes to transport profile attributes without affecting mobility subscribers using other transport profiles.

    Configuration

    Putting the transport profile into Maintenance Mode consists of the following steps:

    Step-by-Step Procedure

    The following steps illustrate how to modify a transport profile.

    1. Verify the current status of Maintenance Mode for this transport profile.
      userhost> show unified-edge ggsn-pgw charging service-mode gateway PGW transport-profile trans_p detail Service Mode Status
      Profile Name    : trans_p
                  Service Mode    : Operational
      
    2. Set the MX router to configuration mode.
      userhost# configure
    3. On the gateway PGW place the transport profile trans_p into Maintenance Mode.
      userhost# set unified-edge gateways ggsn-pgw PGW charging transport-profiles trans_p service-mode maintenance
    4. Commit Maintenance Mode.
      userhost# commit
    5. Verify that the transport profile is in active Maintenance Mode where configuration changes will be accepted for this object and all of its sub-hierarchies.
      userhost# run show unified-edge ggsn-pgw charging service-mode gateway PGW transport-profile trans_p brief Maintenance Mode
      Profile Name        : Service Mode
                  trans_p                  : Maintenance - Active Phase
    6. Exit Maintenance Mode.
      user@host# delete unified-edge gateways ggsn-pgw charging service-mode gateway PGW transport-profile trans_p service-mode maintenance user@host# commit

    Results

    The transport profile is in active Maintenance Mode. Operators can change profile attributes and commit them.

    Published: 2011-06-16