Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Documentation Search

    Connecting to ACM

    You use the Appliance Configuration Manager to configure IDP Series device network settings.

    To connect to ACM:

    1. In the Address or Location box of your Web browser, enter https://IP, where IP is the IP address you assigned to the management interface. For example, if you configured the IP address 10.100.200.1, enter https://10.100.200.1.

      Note: ACM access uses SSL, so you must type https:// and not http://.

    2. Log in as root. If you do not know the root password, contact the administrator who ran the initial setup for the IDP Series device.

    For information on using ACM to configure network communication, see the ACM online Help.

    Tip: ACM logs are located in /var/log/httpd/error_log. You can use these logs to troubleshoot errors connecting to ACM.


    Published: 2011-02-08