Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Documentation Search

    scio sri

    Syntax

    scio sri category [list | set] variable value

    Description

    Enables and configures system resource instrumentation options. When enabled, the system resource instrumentation feature collects and reports statistics to the device MIB and sends SNMP traps.

    Commands take effect immediately. Upon restart, settings are saved to the idp.cfg file. Settings persist across restarts.

    System resource instrumentation adds load to the control plane CPU and to the IDP engine. We recommend you disable reporting for statistics you do not use. If you encounter performance issues, you might choose to disable one or more categories.

    Options

    Table 1 describes scio sri variables and provides examples of command syntax.

    Table 1: Command Reference: scio sri

    Category

    Usage and Example

    resource

    Enables or disables statistics reporting and configures trap thresholds for the resource category of statistics.


    [root@defaulthost ~]# scio sri resource list
    SRI resource :
     sc_enable_resource_stats       = 1      [ 0 - 1 ]
     sc_enable_resource_traps       = 1      [ 0 - 1 ]
     thrshld_idp_cpu                = 40     [ 0 - 100 ]
     thrshld_session_rate           = 40     [ 0 - 100 ]
     thrshld_free_pkt_bufs          = 40     [ 0 - 100 ]
     thrshld_active_sessions        = 40     [ 0 - 100 ]

    [root@defaulthost ~]# scio sri resource set thrshld_idp_cpu 90

    For additional information, see Configuring SNMP Reporting for the Resource Category of Statistics.

    traffic

    Enables or disables statistics reporting and configures trap thresholds for the traffic category of statistics.


    [root@defaulthost ~]# scio sri traffic list
    SRI traffic :
     sc_enable_traffic_stats        = 1      [ 0 - 1 ]

    [root@defaulthost ~]# scio sri traffic set sc_enable_traffic_stats 0

    For additional information, see Configuring SNMP Reporting for the Traffic Category of Statistics.

    rule

    Enables or disables statistics reporting and configures trap thresholds for the rule category of statistics.


    [root@defaulthost ~]# scio sri rule list
    SRI rule :
     sc_enable_rule_stats           = 1      [ 0 - 1 ]

    [root@defaulthost ~]# scio sri rule set sc_enable_rule_stat 0

    For additional information, see Configuring SNMP Reporting for the Rule Category of Statistics.

    interface

    Enables or disables statistics reporting and configures trap thresholds for the interface category of statistics.


    [root@defaulthost ~]# scio sri interface list
    SRI interface :
     sc_enable_interface_stats      = 1      [ 0 - 1 ]
     sc_enable_interface_traps      = 1      [ 0 - 1 ]
     thrshld_rx_pkt_drop_rate_per_if = 40     [ 0 - 100 ]
     thrshld_rx_pkt_drop_per_if     = 40     [ 0 - 100 ]
     thrshld_rx_pkt_drop_all_if     = 40     [ 0 - 100 ]
     thrshld_rx_pkt_drop_rate_all_if = 40     [ 0 - 100 ]
     thrshld_rx_pkt_drop_ovflow     = 40     [ 0 - 100 ]
     thrshld_tx_pkt_drop_per_if     = 40     [ 0 - 100 ]
     thrshld_tx_pkt_drop_all_if     = 40     [ 0 - 100 ]

    [root@defaulthost ~]# scio sri interface set thrshld_rx_pkt_drop_rate_all_if 80

    For additional information, see Configuring SNMP Reporting for the Interface Category of Statistics.

    sensor

    Enables or disables statistics reporting and configures trap thresholds for the sensor category of statistics.


    [root@defaulthost ~]# scio sri sensor list
     SRI sensor :
     sc_enable_sensor_stats         = 1      [ 0 - 1 ]
     sc_enable_sensor_traps         = 1      [ 0 - 1 ]
     thrshld_memory                 = 40     [ 0 - 100 ]
     thrshld_hard_disk              = 40     [ 0 - 100 ]
     thrshld_control_cpu            = 40     [ 0 - 100 ]

    [root@defaulthost ~]# scio sri sensor set thrshld_control_cpu 90

    For additional information, see Configuring SNMP Reporting for the Sensor Category of Statistics.

    all

    Enables or disables statistics reporting and traps for all categories.


    [root@defaulthost admin]# [root@defaulthost ~]# scio sri all list
    SRI Enable all :
     sc_enable_all_stats            = 1      [ 0 - 1 ]
     sc_enable_all_traps            = 1      [ 0 - 1 ]

    [root@defaulthost admin]# [root@defaulthost ~]# scio sri all set sc_enable_all_traps 0

    Published: 2011-02-08