interfaces (QFX Series, ACX Series)
Syntax
The following statements and their associated substatements are not supported on OCX
Series switches: auto-negotiation, speed,
ethernet-switching, fcoe-lag,
fibre-channel, fibrechannel-options,
mc-ae, vlan, vlan-id, and
vlan-tagging.
interfaces {
aex {
disable;
aggregated-ether-options {
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
(fcoe-lag | no-fcoe-lag);
flexible-vlan-tagging;
(flow-control | no-flow-control);
lacp mode {
admin-key key;
force-up;
periodic interval;
system-id mac-address;
}
link-speed speed;
local-bias;
loopback;
no-loopback;
minimum-links number;
}
mc-ae {
chassis-id chassis-id;
mc-ae-id mc-ae-id;
mode (active-active);
status-control (active | standby);
}
description text;
gratuitous-arp-reply | no-gratuitous-arp-reply)
hold-time down milliseconds up milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
interface-range {
powersaving {
member-range starting-interface-name to ending-interface-name;
unused;
}
interface-range-name {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
}
}
(auto-negotiation| no-auto-negotiation);
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
(flow-control | no-flow-control);
link-mode mode;
speed (auto-negotiation | speed);
}
hold-time milliseconds down milliseconds;
member interface-name;
member-range starting-interface-name to ending-interface-name;
unused;
mtu bytes;
unit logical-unit-number {
disable;
description text;
family family-name {...}
(traps | no traps);
vlan-id vlan-id-number;
}
}
lo0 {
disable;
description text;
hold-time milliseconds down milliseconds;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
}
}
mex {
disable;
description text;
hold-time milliseconds down milliseconds;
(gratuitous-arp-reply | no-gratuitous-arp-reply);
no-gratuitous-arp-request;
traceoptions;
traps;
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
}
traps;
vlan-id vlan-id-number;
}
vlan-tagging;
vlan {
disable;
description text;
(gratuitous-arp-reply| no-gratuitous-arp-reply);
hold-time milliseconds down milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
description text;
disable;
family {
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
}
}
fc-0/0/port {
fibrechannel-options {
bb-sc-n;
(loopback | no-loopback);
speed (auto-negotiation | 2g | 4g | 8g);
}
unit logical-unit-number {
disable;
description text;
family {
fibre-channel {
port-mode np-port;
}
(traps | no traps);
}
ge-0/0/port {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
primary;
}
}
(auto-negotiation | no-auto-negotiation);
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
flexible-vlan-tagging;
(flow-control | no-flow-control);
link-mode mode;
loopback;
no-loopback;
speed (auto-negotiation | speed);
}
gratuitous-arp-reply| no-gratuitous-arp-reply);
hold-time milliseconds down milliseconds;
mac
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
description text;
disable;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
vrrp-group group-id {
(accept-data | no-accept-data);
advertise-interval seconds;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost priority;
priority-cost priority;
}
priority-hold-time seconds;
route prefix/prefix-length routing-instance instance-name priority-cost priority;
}
}
virtual-address [ addresses ];
}
xe-0/0/port {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
(primary | backup);
}
}
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
flexible-vlan-tagging;
(flow-control | no-flow-control);
loopback;
no-loopback;
}
(gratuitous-arp-reply| no-gratuitous-arp-reply
hold-time milliseconds down milliseconds;
mac
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
fibre-channel {
port-mode (f-port | np-port);
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
}
Hierarchy Level
[edit]
Description
Configure the interfaces on the QFX Series, ACX Series and OCX Series.
The following statements and their associated substatements are not supported on OCX
Series switches: auto-negotiation,
ethernet-switching, fcoe-lag,
fibre-channel, fibrechannel-options,
mc-ae, speed, vlan,
vlan-id, and vlan-tagging
Most standard Junos OS configuration statements are available in the Junos OS for a switch. This topic lists Junos OS statements that you commonly use when configuring a switch as well as statements added to support switches only.
View the Feature Explorer to know the support platforms for the powersaving feature.
Options
aex—Configure an aggregated Ethernet interface.
xe-0/0/port/—Configure a 10-Gigabit Ethernet interface.
ge-0/0/port/—Configure a Gigabit Ethernet interface.
fc-0/0/port/—Configure a Fibre Channel interface.
meX/—Configure a management interface.
mc-ae—Configure a multichassis aggregated Ethernet (MC-AE) interface.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.1.
Statement support for QFX series introduced in Junos OS EVO Release 21.3