Skip to main content

M800 Watchdog

The Audiocodes M800 platform is among Juniper's certified platforms. Of its capabilities, it supports a hardware watchdog which is enabled by way of a user space application. The watchdog will monitor the responsiveness of the operating system and if there is no activity for a period of time, the system will perform a restart.

Installation

The M800 watchdog plugin is obtained from the official SSR software repository.

note

The instructions for installing and managing the plugin can be found here.

Configuration

No configuration is necessary to activate this plugin.

Troubleshooting

The plugin is installed on the SSR as a Linux service. To confirm its operation, execute the command systemctl status M800_watchdog.

Feb 12 16:28:11 sol_acm800_dut1 systemd[1]: Started Watchdog for the Audiocodes M800 platform.
Feb 12 16:28:11 sol_acm800_dut1 M800_watchdog[17848]: Watchdog thread active
Feb 12 16:28:12 sol_acm800_dut1 M800_watchdog[17848]: Poked the watchdog
Feb 12 16:28:13 sol_acm800_dut1 M800_watchdog[17848]: Poked the watchdog
Feb 12 16:28:14 sol_acm800_dut1 systemd[1]: Stopping Watchdog for the Audiocodes M800 platform...
Feb 12 16:28:14 sol_acm800_dut1 M800_watchdog[17848]: Interrupt signal (15) received.
Feb 12 16:28:14 sol_acm800_dut1 M800_watchdog[17848]: Destructor called
Feb 12 16:28:14 sol_acm800_dut1 M800_watchdog[17848]: Stop called
Feb 12 16:28:14 sol_acm800_dut1 M800_watchdog[17848]: Watchdog thread signaled to disable watchdog and exit
Feb 12 16:28:14 sol_acm800_dut1 M800_watchdog[17848]: Joined with the watchdog thread
Feb 12 16:28:14 sol_acm800_dut1 systemd[1]: Stopped Watchdog for the Audiocodes M800 platform.

Release Notes

Release 3.0.0

Image based install and upgrade (IBU) support for SSR 6.3.0.

Release Date: Sep 30, 2024

Release 2.0.0

Issues Fixed

  • PLUGIN-768 Support the m800 Watchdog plugin in SSR versions 5.1.0 and greater.