ON THIS PAGE
Monitor Traffic Map
You are here: Monitor > Maps and Charts > Traffic Map.
Traffic Map page is available on all the SRX Series devices except the SRX5000 line of devices.
Starting in Junos OS release 20.4R1, J-Web supports monitoring traffic through a map. Use this page to visualize inbound and outbound traffic between geographic regions. You can click or hover over the bubble to view more details on the inbound or outbound traffic. The size of the bubble indicates the session count or the bandwidth utilization for a traffic. Traffic with unknown geographical IP addresses and private IP addresses are displayed as question mark icon and lock icon, respectively.
To view the data on the Traffic Map page, ensure that security logging is enabled. If not, go to Device Administration > Basic Settings > Security Logging and enable Stream mode Logging and On-box reporting.
Application Risk Category
The color code of the bubble indicates the risk associated with the application. Table 1 shows the application risk categories and the risk values.
Application Risk Category |
Risk Value |
---|---|
Critical |
>=5 |
High |
>=4 and <5 |
Unsafe |
>=3 and <4 |
Moderate |
>=2 and <3 |
Low |
>=0 and <2 |
You can calculate the average risk value using the following formula:
Average risk value for a country = Application risk total / Session count total
Field Descriptions
Table 2 displays the fields of the Traffic Map page.
Field |
Description |
---|---|
By Volume |
Displays the bandwidth utilization. This is the default value. |
By Session |
Displays the total number of traffic sessions. |
Inbound Traffic |
Displays the traffic coming through the device from the source countries. |
Outbound Traffic |
Displays the traffic goes through the device to the destination countries. This is the default value. |
Top Sources |
Displays the top 10, 20 (default value), or 50 source countries with the following details:
|
Top Destinations |
Displays the top 10, 20 (default value), or 50 destination countries with the following details:
|
View Data |
Displays the traffic data for the defined time interval. By default, traffic data for the last hour is displayed. You can select the predefined time interval or click Customize to customize the time interval by entering date and time. |
Search |
Enter the country name for which you want to view the data and click the search icon. You can view the country flags before the country names. Click on the country name to view its data. |
Tasks You Can Perform
You can perform the following tasks from this page:
Zoom in and out of the page—Click the zoom in (+) and zoom out (–) icons to zoom in and out of the page.
Refresh the data on the page—Click the refresh icon available below the zoom out icon.
Pan the page—Click and drag the mouse to pan the page.
View country-specific details—Hover over the bubble to view the country specific details.