inet6-vpn
Syntax
inet6-vpn (any | multicast | unicast) {
aggregate-label;
prefix-limit maximum;
rib-group rib-group-name;
}
Hierarchy Level
[edit logical-systems logical-system-name protocols bgp family], [edit logical-systems logical-system-name protocols bgp group group-name family], [edit protocols bgp family], [edit protocols bgp group group-name family]
Description
Enable IP version 6 (IPv6) on the provider edge (PE) router for the Layer 3 VPN.
The [edit logical-systems] hierarchy level
is not applicable in ACX Series routers.
Options
any—Configure the family type
to be both multicast and unicast.
multicast—Configure the family type to be multicast.
This means that the BGP peers are being used only to carry the unicast
routes that are being used by multicast for resolving the multicast
routes.
prefix-limit maximum—Maximum
prefix limit.
Range: 1 through 4,294,967,295
Default: 1
rib-group rib-group-name—The
name of the routing table group.
unicast—Configure the family type to be unicast.
This means that the BGP peers only carry the unicast routes that are
being used for unicast forwarding purposes.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.