unicast-mode
Syntax
unicast-mode {
clock-source ip-address {
local-ip-address local-ip-address;
asymmetry number;
}
transport ipv4;
clock-ipv6-source master-ipv6-address {
local-ip-address local-ip-address;
}
transport ipv6;
}
ACX710
unicast-mode {
announce-timeout announce-timeout;
grantor;
local-priority local-priority;
master-only;
remote-ip-address ip-address {
local-ip-address;
announce-interval announce-interval;
asymmetry asymmetry;
delay-request delay-request;
dscp dscp;
grant-duration grant-duration;
sync-interval sync-interval;
}
transport (ipv4 | ipv6);
}
Hierarchy Level
[edit protocols ptp client interface interface-name]
Description
Configure the slave in unicast mode. You can set this option when PTP unicast mode of messaging is needed.
Options
| announce-timeout-value | The announce timeout value for announce interval messages.
|
| grantor | Specify that the selected interface port can be grantor. The grantor attribute enables the port to allow for the grant-port property and can provide PTP message services. It allows the port to accept and handle unicast negotiation requests. |
| Priority value | Priority value.
|
| master-only | Specify master only option. When you set master-only option, it is not possible to set the interface port as client clock. |
| transport | Encapsulation for PTP packet transport
|
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.2.