Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

slave

MX Series

QFX Series

ACX Series (ACX5448, ACX5448-D, and ACX5448-M)

Hierarchy Level

Description

Configure the client with parameters.

Note:

Multicast mode is not supported on the QFX Series, ACX5448, ACX5448-D, and ACX5448-M devices.

Options

announce-interval

Configure the logarithmic mean interval for the announce messages to be sent by the primary.

  • Range: 0 through 3 seconds

  • Default: 1

announce-timeout

Specify the number of announce messages a client must miss before an announce-timeout is declared.

  • Range: 2 through 10 seconds

  • Default:

delay-request

Configure the logarithmic mean interval in seconds between the delay request messages sent by the client to the primary.

Specify the grant duration value for the announce messages.

  • Range: 60 through 7200 seconds

  • Default: 300 seconds

frequency-only

Configure frequency synchronization.

hybrid

Configure the timing and synchronization feature to operate in Sync-E assisted PTP mode of operation.

unicast-mode

Configure the client in unicast mode.

clock-source

Configure the IP address of the primary.

multicast-mode

Configure multicast transmission of PTP packets between the primary node and the client node.

transport 802.3

Configure Ethernet as the encapsulation type for transport of PTP packets.

sync-interval

Configure the logarithmic mean interval for sync interval messages to be sent by the primary.

unicast-mode

Configure the primary in unicast mode.

clock-client

Configure the IP address of the client

transport

Configure the encapsulation type for PTP packet transport.

local-ip-address

Configure the IP address of the interface acting as the client or the primary.

local-priority

Configure a clock’s local priority to be used as a tie-breaker in the dataset comparison algorithm, if all other attributes of the datasets being compared are equal.

max-announce-interval

Configure the maximum log mean interval between announce messages.

max-delay-response-interval

Configure the maximum log mean interval between delay-response messages.

max-sync-interval

Configure the maximum log mean interval between synchronization messages.

min-announce-interval

Configure the minimum log mean interval between announce messages.

min-delay-response-interval

Configure the minimum log mean interval between delay-response messages.

min-sync-interval

Configure the minimum log mean interval between synchronization messages.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 12.2.