no-redirects (IPv4 Traffic)
Syntax
no-redirects;
Hierarchy Level
[edit system] [edit interfaces interface-name unit logical-unit-number family family]
Description
Stop protocol redirect messages for IPv4 traffic from being sent on the entire device or on an interface on the device.
To disable the sending of protocol redirect messages for the entire device, include
the no-redirects
statement at the [edit system]
hierarchy level.
To disable the sending of protocol redirect messages on a specific interface, include
the no-redirects
statement at the [edit interfaces
interface-name unit
logical-unit-number family
family]
hierarchy level.
Hyper-mode is the default forwarding mode on the SCBE3-MX. In Junos versions prior to 19.2R1, ICMP redirects are disabled by default and cannot be re-enabled in hyper mode.
Default
For EX Series Switches: The interface sends redirect messages.
For other devices: The device sends redirect messages.
Required Privilege Level
For EX Series Switches:
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
For other devices:
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.