tunnel-services (Chassis)
Syntax
tunnel-services {
bandwidth bandwidth-value;
tunnel-only;
}
Hierarchy Level
[edit chassis fpc slot-number pic number]
Description
For MX Series 5G Universal Routing Platforms, configure the amount of bandwidth for tunnel services.
For ACX Series routers, configure the amount of bandwidth for tunnel services. Only bandwidths of 1 Gbps and 10 Gbps are supported for ACX routers.
For M7i, M10i, M120, M320, T Series and TX Matrix routers with
IQ2 PICs and IQ2E PICs, configure support for per unit scheduling
for GRE tunnels. You can specify the IQ2 and IQ2E PICs to work exclusively
in tunnel mode or as a regular PIC. The default setting uses IQ2 and
IQ2E PICs as a regular PIC. If you do not configure the tunnel-only option, the IQ2 and IQ2 PICs operate as regular PICs. For M7i, M10i,
M120, M320, T Series and TX Matrix routers with IQ2 PICs and IQ2E
PICs, you can use the tunnel-only option to specify that
an IQ2 or IQ2E PIC work in tunnel mode only.
Bandwidth rates of 20 gigabits per second and 40 gigabits per second require use of an MX Series router with the 100-Gigabit Ethernet Modular Port Concentrator (MPC) and the 100-Gigabit CFP MIC.
On MX80 routers and MX Series routers with Trio-based FPCs, when ingress queuing is enabled for a PIC, tunnel services and inline services are not supported on the same PIC.
Options
tunnel–only (Optional)—For
M7i, M10i, M120, M320, T Series and TX Matrix routers with IQ2 PICs
and IQ2E PICs, specify that an IQ2 or IQ2E PIC work in tunnel mode
only.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 8.2.