show interfaces demux0 (Demux Interfaces)

Syntax

Display status information about the specified demux interface.

none	Display standard information about the specified demux interface.
brief \| detail \| extensive \| terse	(Optional) Display the specified level of output.
descriptions	(Optional) Display interface description strings.
media	(Optional) Display media-specific information.
snmp-index `snmp-index`	(Optional) Display information for the specified SNMP index of the interface.
statistics	(Optional) Display static interface statistics.

view

Table 1 lists the output fields for the show interfaces ifl-name command. Output fields are listed in the approximate order in which they appear.

Table 1: show interfaces Output Fields
Field Name	Field Description	Level of Output
Physical Interface
`Link`	Status of the physical link (Up or Down).	`terse` none
`Targeting summary`	Status of LT links that are configured with targeted distribution (primary or backup)	`extensive` none
Logical Interface
`Logical interface`	Name of the logical interface.	`brief detail extensive` none
`Index`	Index number of the logical interface, which reflects its initialization sequence.	`detail extensive` none
`SNMP ifIndex`	SNMP interface index number for the logical interface.	`detail extensive` none
`Flags`	Information about the logical interface. Possible values are described in the “Logical Interface Flags” section under Common Output Fields Description.	`brief detail extensive` none
`Encapsulation`	Type of encapsulation configured on the logical interface.	`brief extensive` none
`Demux`	Specific IP demultiplexing (demux) values: Underlying interface—The underlying interface that the demux interface uses. Index—Index number of the logical interface. Prefix—inet family prefix. Family—Protocol family configured on the logical interface. Source prefixes, total—Total number of source prefixes for the underlying interface.	`detail extensive` none

Command introduced in Junos OS Release 21.4R1.