rule (IP Reassembly)
Syntax
rule rule-name {
match-direction direction;
}
Hierarchy Level
[edit services ip-reassembly]
Description
Configure an IP reassembly rule, which is used
for inline IP reassembly on the inline services interface. The IP
reassembly rule can be attached to a service set to indicate that
the service set is of type IP reassembly. For inline IP reassembly,
each rule must include the match-direction statement, which
specifies the direction in which the match is applied.
If you configure an IP reassembly rule, then you must
configure the match-direction statement.
To create more than one IP reassembly rule, include the rule statement multiple times.
Options
| rule-name | Name of the IP reassembly rule.
|
The remaining statement is explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 13.1.
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480 and MX960 with the MX-SPC3 services card.