device-count (Pseudowire Subscriber Interfaces)
Syntax
device-count number;
Hierarchy Level
[edit chassis pseudowire-service]
Description
Configure the number of pseudowire logical devices available to the router. The statement also defines the available interface names for the pseudowire interfaces.
When you subsequently configure the pseudowire interfaces, you must specify the interface names in the range from ps0 up to ps(device-count - 1). For example, if you set the maximum number of devices to 5, then you can only configure interfaces ps0, ps1, ps2, ps3, and ps4. If you specify an interface name outside that range, the pseudowire interface is not created.
Options
| number | Number of devices. |
Range: 1 through 7000, 1 through 18000 for MX2010 and MX2020 routers with the MX2K-MPC9E or MX2K-MPC11E line card
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 13.1.
Increased upper limit in Junos OS Release 20.4R1.