You can configure a Diameter network element to run on
a specific session PIC. You can organize other session PICs in a group
around the selected session PIC on which the configured network element
runs. When organized in a group, the selected session PIC can send
and receive messages for other session PICs in the group. By default,
every Diameter network element runs on every session PIC.
Note: If you want to set up Diameter bindings for session PICs
on the broadband gateway, contact Juniper Networks Professional Services
for assistance.
To configure the Diameter binding for network elements:
- Configure the network element used for the Diameter binding
on the broadband gateway.
[edit]
user@host# set unified-edge tdf gateway gateway-name diameter network-element element-name
- Specify the session PICs group that serves the network
element.
[edit unified-edge tdf gateway gateway-name diameter network-element element-name]
user@host# set session-pics group group-name
- Specify the session PIC interfaces in this group that
serve the network element. The interface must be a multiservices interface.
[edit unified-edge tdf gateway gateway-name diameter network-element element-name session-pics group group-name]
user@host# set session-pic ams number
user@host# set session-pic ms-fpc/pic/port
