show openflow statistics groups

Syntax

Description

Display statistics for OpenFlow groups. Groups are supported only on Juniper Networks devices running OpenFlow v1.3.1 or later.

Options

none	Display statistics for all groups defined on all OpenFlow virtual switches.
`group-id`	(Optional) Display statistics only for the specified group.

Required Privilege Level

admin

Output Fields

Table 1 lists the output fields for the show openflow statistics groups command. Output fields are listed in the approximate order in which they appear.

Table 1: show openflow statistics groups Output Fields
Field	Description
`Switch Name`	User-configured identifier for the OpenFlow virtual switch in which the groups resides.
`Group ID`	Unique identifier assigned to the group by the OpenFlow controller.
`Ref Count`	Number of flow entries that reference the group.
`Number of packets` (group)	Number of packets handled by the group.
`Number of bytes` (group)	Number of bytes handled by the group.
`Duration(in sec)`	Number of seconds the group has been active.
`Duration(in nsec)`	Number of nanoseconds the group has been active beyond the `Duration(in sec)`
`Bucket number`	Statistics for a particular bucket.
`Number of packets` (bucket)	Number of packets handled by a bucket in the group.
`Number of bytes` (bucket)	Number of bytes handled by a bucket in the group.

For a group with the group type of all, the values specified in the Number of packets (group) and Number of bytes (group) fields are usually the same as those specified in the Number of packets (bucket) and Number of bytes (bucket) fields because all buckets in the group are executed.