Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Unsupported Features and CLI Commands When Hyper Mode Is Enabled

Table 1 lists the features and corresponding CLI commands that are not supported when the hyper mode feature is enabled. Also, the table lists the error messages displayed when you use the unsupported commands.

Table 1: Unsupported Features and CLI Commands When Hyper Mode Is Enabled

Features

Commands

Error Message

Virtual Chassis

set virtual-chassis preprovisioned

To configure virtual-chassis, 'forwarding-options hyper-mode' should not be configured

set virtual-chassis member member-id role role serial-number ser_num

set virtual-chassis no-split-detection

ICMP Redirect

set system no-redirects

To configure system no-redirects, 'forwarding-options hyper-mode' should not be configured

set system no-redirects-ipv6

To configure system no-redirects-ipv6, 'forwarding-options hyper-mode' should not be configured

set interface interface-name unit unit family inet no-redirects

To configure family inet no-redirects, 'forwarding-options hyper-mode' should not be configured

set interface interface-name unit unit family inet6 no-redirects

To configure family inet6 no-redirects, 'forwarding-options hyper-mode' should not be configured

VLAN Ethernet Padding

set interfaces interface-name gigether-options pad-to-minimum-frame-size

To configure gigether-options pad-to-minimum-frame-size, 'forwarding-options hyper-mode' should not be configured

set interfaces interface-name aggregate-ether-options pad-to-minimum-frame-size

To configure aggregate-ether-options pad-to-minimum-frame-size, 'forwarding-options hyper-mode' should not be configured

PPPoE

set interface interface-name unit unit encapsulation ppp-over-ether

Can't configure protocol family with encapsulation ppp-over-ether or hyper-mode should not be configured

set interface interface-name unit unit family pppoe

To configure family pppoe, 'forwarding-options hyper-mode' should not be configured

set protocols pppoe service-name-tables table-name

To configure pppoe, 'forwarding-options hyper-mode' should not be configured

set dynamic-profiles profile-name interfaces interface-name unit unit family pppoe

To configure family pppoe, 'forwarding-options hyper-mode' should not be configured

set dynamic-profiles profile-name interfaces demux0 unit unit family pppoe

To configure family pppoe, 'forwarding-options hyper-mode' should not be configured

L2TP

set access tunnel-profile profile-name tunnel tunnel-id tunnel-type l2tp

To configure l2tp, 'forwarding-options hyper-mode' should not be configured

set services l2tp

To configure services l2tp, 'forwarding-options hyper-mode' should not be configured

Forwarding class accounting (enhanced mode)

For more information and CLIs, see CoS-Based Interface Counters for IPv4 or IPv6 Aggregate on Layer 2 and forwarding-class-accounting.

-–

Junos Node Slicing

For CLIs, see Setting Up Junos Node Slicing.

-–

Junos Fusion

For CLIs, see Junos Fusion Provider Edge User Guide and Junos Fusion Enterprise User Guide.

-–

Provider Backbone Bridging (PBB) and Ethernet VPN (EVPN)

For CLIs, see EVPN User Guide.

-–

Precision Time Protocol

For more information, see Configuring Precision Time Protocol